Owner manual

Connect the Tool

To connect the Tool to the vehicle:

1. Locate the OBDII connector under the steering column.

If the connector is not there, a label should be there indicating

the whereabouts of the connector.

2. If necessary, remove the cover from the vehicle connector.

3. Turn the ignition switch to the ON position. Do not start the

engine.

4. Plug the OBD II Connector attached to the Tool into the vehicle

connector.

The Tool automatically reads ALL

the data from the vehicle then displays

the Main Menu.

View Codes/Data Types

To view the codes or data types:

1. From the Main Menu, press the READ or ERASE arrow key

until the desired code or data type (Codes, MIL Status, I/M

Monitors,FreezeFrame,orVIN)isvisible,thenpressthe

ENTER key to display the results for that data type:

2. Press READ or ERASE to scroll through the codes and data.

3. Press

ENTER to return to the Main Menu selection screen.

Main Menu ↓

1) Codes

P0183  Mod$00 ↓

Fuel Temperature