User`s manual

15
User’s Manual PME Ascender 4-stroke engine
SYSTEM DESCRIPTION
1
6
2
3
4
5
NO PART
1 Secondary connection
2 Lower hole, NOT FOR LIFTING
3 Loop (Rope guide)
4 Knife
5 Rope Cover
6 Rope Grab
General
This product has been designed for lifting a
person or load in a static rope system (inclu-
ding backup rope) with ropes of 10-13 mm
approved by EN1891. The dead rope shall be
unloaded.
The karabiner in the primary connection
can be replaced by any other karabiner
approved by EN362. The sling in the chassis
cannot be replaced by anything other than
an original spare part from ActSafe Systems
AB.
Engine & fuel
The ascender is equipped with a 4-stroke
engine. Normal 4-stroke unleaded petrol
91-octane or higher may be used. However,
we recommend the use of a 4-stroke alcylate-
petrol 95 octane.
• It gives the engine higher performance.
• It gives a cleaner engine.
• Alcylate 4-stroke petrol can be stored
for long periods without impairing the
quality.
• It does not contain the toxins lead,
benzene, aromatics or sulphur.