User`s manual

20
© Copyright ActSafe Systems AB
USAGE
Emergency descent
Stay connected to your backup rope sys-
tem during all these steps. In the pictures
the backup system is excluded for clarity.
Use the equipment in the rescue kit.
1. Attach the Descender to the rope under
the ascender and connect it to the
harness with the attached red karabiner.
Ensure that the Descender have been
threaded correctly.
1
2-4
2. Attach the rope clamp (blue karabiner)
to the live rope above the ascender
(approx. 10 cm).
3. Connect the rope clamp to the harness
with the red karabiner on the shorter
sling.
4. Tighten the short sling by pushing
the rope clamp up.
The connection to the live rope is now formed
by the rope clamp that is attached to the
harness by the short sling.
5. Release the rope from the rope grab.
The Ascender is now loose and you are
connected to the rope clamp, the Descender
and your backup system.
Have sucient rope slack (approx 0.5 m)
between the Ascender and the Descender
so you can work easily.
RECOMMENDATION