User`s manual

26
© Copyright ActSafe Systems AB
SERVICE & MAINTENANCE
Spark plug
The spark plug can have deposits on the
electrodes, which may result in malfunction
and/or starting diculties. The spark plug
condition is inuenced by:
• A dirty air lter.
• Hard running conditions.
In some areas, local legislation requires
using a resistor spark plug to suppress
ignition signals. If the engine was originally
equipped with a resistor spark plug, you
have to choose the same type of spark plug
whenever you replace it.
Equipment list
Hex key 4 mm – straight end
Wrench 10 mm
Wrench 13 mm
Screwdriver
Pliers and hammer
Material
Thin Oil
CRC 5-56
Loctite 243
Grease Interon LS 2
Oil level check and change
Check the engine oil level with the engine
stopped and in a level position. Change the
oil regularly to prolong the lifetime of the
engine.
Spare parts
The most common parts are listed here;
contact ActSafe Systems AB or your local
distributor if you don’t nd your part here.
Rope grab 50-150-101
Cover 50-150-103
Knife 50-150-105
Safety Shear bolt 50-150-115
Loop 50-150-106
Sling 50-150-112
Karabiner 50-105-052
Drain the used oil when the engine is warm.
Warm oil drains quickly and completely.
RECOMMENDATION