User`s manual

7
User’s Manual PME Ascender 4-stroke engine
SAFETY
SAFETY
Ascender safety
Users of this product must have been cer-
ti ed or have undergone proper approved
training either by ActSafe Systems AB or by
ActSafe approved distributors.
The ascender must not be used:
• For anything other than that for which
it has been designed.
• In an explosive environment.
• If modi ed in any way by anyone other
than ActSafe Systems AB.
• After a free fall from a height more than
1 meter against any hard surface.
• If subjected to a dynamic load as it is
designed to work in static systems only.
• If subjected to mis-use in any way those
parts or components may have been
damaged.
Use only original spare parts / material
recommended by ActSafe Systems AB.
If unclear of the condition of the ascen-
der, it must be inspected and approved by
ActSafe Systems AB or an ActSafe approved
distributor before use.
The ActSafe Ascender and its equipment
must be checked before and after every use
and must be subject to at least one inspec-
tion per year (national regulations may
require more frequent inspections).
Read this chapter carefully and make sure
you understand its contents.
DANGER