Instructions / Assembly

http://www.advancedactuators.com
NextBolt User Manual
For support contact us a 1-800-408-7101 ext. 102
34
 A single short beep will be heard and
the fingerprint sensor will power on
 Rest the new user’s pointer finger on
the sensor window during the first of
three scans
 Keep your pointer finger on the
scanning window until you hear a
single long beep or four beeps.
After the scanning is completed you
will hear one of the following:
o Single, long beep indicating
that the operation was
successful
OR
o Four beeps indicating that
your fingerprint was not
successfully enrolled. If you
hear four beeps, please start
the enrollment process over
from the beginning
Once enrollment begins users can be
enrolled consecutively without the need
to verify the administrator again. After
you hear the long beep simply enter in
the next KEYPRESS SEQUENCE from
the APPENDIX A for the next user.
 Close the sliding cover to end the
enrollment procedure.