Instructions / Assembly
http://www.advancedactuators.com
NextBolt User Manual
For support contact us a 1-800-408-7101 ext. 102
52
We would like to personally thank you for your purchase of our exciting NextBolt Series
biometric deadbolt lock from Actuator Systems. We hope you enjoy using it as much as we
enjoy developing this technology for you.
For more helpful information about your NextBolt please visit
www.advancedactuators.com/support.php or our knowledgebase at
http://www.advancedactuators.com/kb/
For all Tech Support Questions:
Call: 407-567-7130 Ext 102 or Email: support@advancedactuators.com
To reach the main office: 407-567-7130
Frequently Asked Questions (FAQ)
Here are a few answers to common installation questions. (These account for 90% of the inquiries we
receive to our technical support department).
1) When you mate the front and back of the lock together insure the bolt is in the *locked*
(out) position and the knob is pointing directly down. This will cause the notch the tailpiece
fits into to be in a vertical position.
2) Insure the wire that runs between the two lock pieces does not interfere with the rotation of
the tailpiece.
3) Issues with fingerprint recognition are due to a poor enrollment 95% of the time. High
quality enrollments are the key to fast and reliable operation of your new lock. Ensure when
you place your finger on the pad for enrollment that as much of your finger as possible is in
contact with the sensor. Do not move your finger while it is being scanned – wait until
you hear the long beep. Keep even pressure applied to the center of the fingerprint pad.
You can enroll the same finger more than one time. It also can help enrollment if the finger
you use is not overly dry.
a. We have included in your pack 2 disposable fingerprint enhancement pads.
These pads are only necessary in the event you had trouble enrolling. To use
just wipe your finger with one of the pads 5 seconds before enrollment. These
pads considerably enhance the quality of the ridges of the fingerprint.
Thanks again from your friends at Actuator Systems!