Data Sheet

100mm L12 Actuator
Actual Size
Benefits
Compact
Simple control
Low voltage
Equal push/pull
Easy mounting
Applications
Robotics
Appliances
Toys
RC vehicles
Automotive
Industrial
Automation
Miniature Linear Motion Series · L12
Actuonix Motion Devices unique line of Miniature Linear Actuators enables a new
generation of motion-enabled product designs, with capabilities that have never before
been combined in a device of this size. These small linear actuators are a superior
alternative to designing with awkward gears, motors, servos, and linkages.
Actuonix’s L series of micro linear actuators combine the best features of our existing
micro actuator families into a highly flexible, configurable, and compact platform with an
optional sophisticated on-board microcontroller. The first member of the L series, the
L12, is an axial design with a powerful drive-train and a rectangular cross section for
increased rigidity. But by far the most attractive feature of this actuator is the broad
spectrum of available configurations.
L
12 Specifications
Gearing Option 50:1
100:1
210:1
Peak Power Point 17N
@
14mm/s
31N
@
7mm/s
62N
@
3.2mm/s
Peak Efficiency Point 10N
@
19mm/s
17N
@
10mm/s
36N
@
4.5mm/s
Max Speed
(no load)
25mm/s
13mm/s
6.5mm/s
Max Force
(lifted)
22N
42N
80N
Back Drive Force
(static)
12N
22N
45N
Stroke Option 10 mm
30mm
50mm
100mm
Mass 28 g
34 g
40 g
56 g
Repeatability
(-I,-R,-P&LAC)
±0.1 mm
±0.2 mm
±0.3 mm
±0.5 mm
Max Side Load
(extended)
50N
40N
30N
15N
Closed Length
(hole to hole)
62mm
82mm
102mm
152mm
Potentiometer
(-I, -R, -P)
1kΩ±50%
3kΩ±50%
6kΩ±50%
11kΩ±50%
Voltage Option 6VDC
12VDC
Max Input Voltage 7.5V
13.5V
Stall Current 460mA
185mA
Standby Current
(-I/-R)
7.2mA
3.3mA
Operating Temperature
-10°C to +50°C
Potentiometer Linearity Less than 2.00%
Max Duty Cycle 20 %
Audible Noise 55dB @ 45cm
Ingress Protection IP-54
Mechanical Backlash 0.2mm
Limit Switches
(-S)
Max. Current Leakage: 8uA
Maximum Static Force 200N
1 - Control Option Specific values are identified with -I, -R, -P, -S, and LAC
2 - 1 N (Newton) = 0.225 lbf (pound-force) & 25.4mm=1 Inch
3 - A powered-off actuator will statically hold a force up to the Backdrive Force
4 - Actuators should be tested in each specific application to determine their effective life under those loading
conditions and environment.
All information provided on this datasheet is subject to change. Purchase or use of Actuonix actuators is subject to
acceptance of our terms and conditions as posted here: http://www.actuonix.com/terms.asp
Copyright 201
6
Actuonix Motion Devices Inc
.

Summary of content (4 pages)