Manualshelf

Data Sheet

ManualsBrandsActuonix ManualsLinear ActuatorsActuonix P16 Linear Actuator, 50mm, 22:1, 12V w/ Limit Switches
123
P16 Actual Size
Applications
→ Robotics
→ Consumer appliances
→ Toys
→ RC vehicles
→ Industrial Automation
→ Automotive
Miniature Linear Motion Series · P16
Actuonix Motion Devices unique line of Miniature Linear Actuators enables a new
generation of motion-enabled product designs, with capabilities that have never before
been combined in a device of this size. These linear actuators are a superior alternative to
designing your own push/pull mechanisms.
The P16 actuators are complete, self-contained linear motion devices with position
feedback for sophisticated position control capabilities, or end of stroke limit switches for
simple two position automation. Several gear ratios are available to give you varied
speed/force configurations.
The parallel design makes the P16 significantly shorter than the same stroke length L16,
but the most attractive feature of this model is its high cycle life. Premium components in
this model include: large sealed stainless steel bearings, planetary gearbox, stainless steel
lead screw, and glass re-enforced nylon housing.
Basis of Operation
The P16 is designed to push or pull a load axially along its full stroke length. The speed of
travel is determined by the load applied (See the Load Curves). Actuator speed can be
reduced by lowering the drive voltage. When power is removed the actuator will hold its
position, unless the applied load exceeds the back drive force. Repeated stalling or stalling
for more than a few seconds will shorten the life of the actuator significantly. Actuators
should be tested in each specific application to determine their effective life under those
loading conditions and environment.
All data on this sheet is provided for information purposes only and is subject to change. Purchase and use of
Actuonix Actuators is subject to our terms and conditions as posted here: http://www.Actuonix.com/terms.asp
P16 Specifications
Gearing Option 22:1
64:1
256:1
Peak Power Point
40N @26mm/s
80N @9mm/s
250N @2.5mm/s
Peak Efficiency Point
25N @34mm/s
40N @14mm/s
150N @3.4mm/s
Max Speed (no load) 46mm/s
18mm/s
4.8mm/s
Max Force Lifted 50N
90N
300N
Back Drive Force 75N
200N
>500N
Stroke Option 50mm
100mm
150mm
200mm
Mass 95g
110g
125g
140g
Repeatability (-P & LAC) 0.3mm
0.4mm
0.6mm
0.8mm
Max Side Load 20N
15N
10N
4N
Closed Length
hole to hole
97mm
147mm
197mm
247mm
6kΩ
±5
0%
11kΩ
±5
0%
20kΩ
±5
0%
23kΩ
±5
0%
Feedback Linearity Less than 2.00%
Input Voltage 0-15 VDC. Rated at 12VDC.
Stall Current 1000mA @ 12V
Operating Temperature
-10°C to +50°C
Audible Noise 62 dB @ 45cm
Ingress Protection
IP-54
Mechanical Backlash
0.3mm
Limit Switches (
-
S)
Max. Current Leakage: 8uA
Maximum Static Force
500N
Maximum Duty Cycle
20%
Copyright 2016
Actuonix Motion Devices Inc.
Rev B Sept 2016

Summary of content (3 pages)