User guide

MICRO-LINE Reference Manual
9
Scale Resolution
To ensure accurate readings, the scale resolution shown for each axis
must correspond with the resolution of the scales on your machine.
• If necessary, choose “Scale Resolution” from the Setup menu. (Press
SETUP and then the ENTER key until the screen appears).
• Press the X-axis key until the appropriate resolution appears. Choose
0.01 mm for 10µm (0.0005”) scales and 0.005 mm for 5µm (0.0002”)
scales (international units only).
• Repeat the procedure for each axis.
• Press
ENTER to continue with Setup.
To change the scale resolution:
SETUP
MLMmanual.QXD 2/12/02 5:01 PM Page 22