Instruction Manual

PROGRAM STEPS

MILLPWR

Operation Manual

5-19

Slot

You can program a slot two ways:

• By entering the center point of each arc and the slot's width

• By entering the center point of one arc, the length and width of the slot, and the

tilt angle

Choose a method based upon the information available from the print.

To program a slot:

• Press the RECT key.

• Press the SLOT softkey.

• Enter the X- and Y-axes coordinates for the “1

Arc

Center.”

• Enter the X- and Y-axes coordinates for the “2

Arc

Center” or press the

MORE softkey and enter the

“Slot Length” and “Tilt Angle.”

• Enter the depth.

• Select the direction you want the slot to be cut.

Press the

CW softkey for clockwise or the

CCW softkey for a counter-clockwise direction.

• Enter the slot's width.