User manual

398 11 G-Code Edit, Help, & Advanced Features
11.4 Advanced Programming
Select Block Skip
The 3500i control has nine (9) optional block skip 'switches'. The (/)
code followed by a number 1 through 9 activates the corresponding
switch.
 In this example, the hole at N15 is skipped. If N11 read:
N11#1002 = 0
Then N15 would be executed.
 #1001 through #1009 are reserved for optional block skip use.
Example: N11 #1002 = 1 *Note: 0=OFF, 1=ON
N12 G81 Z- .5 R.1 F12 P.1
N13 X1 Y1
N14 X2
/2N15 X3
N16 X5
N17 G80