Instruction Manual

Readout Operations VRO 300T
12
Crossfeed Axis
1. Make sure that the absolute position is displayed.
2. Machine the diameter.
3. While the tool is still contacting the
workpiece, press the
ZERO
key for the
appropriate axis, then the
LOCK AXIS
softkey. The readout will lock
this tool position in the display, even if you move the tool.
4. Move the tool away and measure the diameter.
5. Enter the diameter.
Incremental Zero
From the readout incremental display, press the
ZERO
key. This sets the
incremental display to zero at the current tool position.
Dia = 1.05
Z
1 0 5
ENTER
.
This puts the zero on the
workpiece centerline
ABS
INCR
ABS