Instruction Manual

Setup VRO 300T
46
Serial Port
You can configure the serial port to connect to a printer or to a computer.
Check the specifications for your printer or computer to determine how to
complete the following information. For most
items, the softkeys will provide you with the
available choices.
FUNCTION—identifies what you’re communicating
with, a printer or a computer. Press
OFF
to
disable the serial port.
OUTPUT TAIL—enter the number of blank lines (CR
character), from 0 to 9, that you want to print
after the information is sent.
LF AFTER CR—press
YES
if you want to output a
line feed character after the carriage return (end
of line).
BAUD—press the
LOWER
and
HIGHER
keys to cycle
through the available information transmission
speeds (baud rate).
PARITY—select none, even, or odd.
DATA BITS—use the softkeys to select 7 or 8 bit word length.
STOP BITS—use the softkeys to select 1 or 2 stop bits.
SERIAL PORT
PORT CONFIGURATION
FUNCTION
OUTPUT TAIL
PRINTER
0
LF AFTER CR NO
PORT PROTOCOL
BAUD
PARITY
1200
NONE
DATA BITS 8
STOP BITS 1