Brochure

AVAILABLE SIZES (Special sizes available upon request)

NOMINAL DOOR SIZE W X H WEIGHT PER DOOR

inches mm Opening lbs. kg.

6 X 6 150 X 150 4-3/4 X 4-3/4 1.25 0.6

8 X 8 200 X 200 6-3/4 X 6-3/4 1.75 0.8

10 X 10 250 X 250 8-3/4 X 8-3/4 2.75 1.3

12 X 12 300 X 300 10-3/4 X 10-3/4 3.75 1.7

14 X 14 350 X 350 12-34 X 12-3/4 4.75 2.2

16 X 16 400 X 400 14-3/4 X 14-3/4 5.25 2.4

18 X 18 450 X 450 16-3/4 X 16-3/4 6.75 3.1

20 X 20 500 X 500 18-3/4 X 18-3/4 9 4.1

24 X 24 610 X 610 22-3/4 X 22-3/4 12 5.5

Duct opening is 1 1/4” or (31 mm) smaller than door

For detailed specications see submittal sheet

DUCT DOORS for Sheet Metal Duct

CD-5080

Application

• Assures a tight seal without obstruction in the air system

Product Features

• These doors are designed for use in LOW to medium pressure

up to 3” static W.G.

• 5/8” notched knock over tabs on the inside of the frame

provide for easy installation

Options:

• ALUMINUM

• STAINLESS STEEL

• VISION PANELS

• CYLINDER LOCK & KEY

• HASP + STAPLE

• L HANDLE

CD-5080 Duct Access Door Specications:

Door: 24 gauge galvanized steel,double panel

Frame: 24 gauge galvanized steel with 5/8" notched knock over tabs

Hinge: Continuous aluminum piano hinge (HD-5070 only)

Insulation: Door panel lled with 2" berglass insulation (7.7 R factor),

compressed into 1".

Gasketing:1/8" thick by 1/2" wide closed cell neoprene gasketing

between door and frame

Latch:Self tightening, hand operated cam latch

For more information on Acudor Products Inc. visit www.acudor.com or call 800.722.0501