User's Manual

DTL – A Division of Acuity Brands Lighting Inc.
DTL01/DTL02 User’s Manual
THIS DOCUMENT IS DTL PROPRIETARY Page 7/11
http://processors.wiki.ti.com/index.php/LPRF_BLE_HCITester
Once the program can connect with the radio UART, the FCC tests that will need to be run are listed at:
http://processors.wiki.ti.com/index.php/FCC_ETSI_Test
Command
CW Mode
RF Channel
Description
HCI_EXT_ModemTestTx
Unmodulated
0
TX Continuous Wave (CW), 2402
MHz, 0 dBm
HCI_EXT_ModemTestTx
Unmodulated
19
TX Continuous Wave (CW), 2440
MHz, 0 dBm
HCI_EXT_ModemTestTx
Unmodulated
39
TX Continuous Wave (CW), 2480
MHz, 0 dBm
HCI_EXT_ModemTestTx
Modulated
0
TX Modulated, 2402 MHz 0 dBm
HCI_EXT_ModemTestTx
Modulated
19
TX Modulated, 2440 MHz 0 dBm
HCI_EXT_ModemTestTx
Modulated
39
TX Modulated, 2480 MHz 0 dBm
HCI_EXT_ModemTestRx
N/A
0
RX On, 2402 MHz Standard gain
HCI_EXT_ModemTestRx
N/A
19
RX On, 2440 MHz Standard gain
HCI_EXT_ModemTestRx
N/A
39
RX On, 2480 MHz Standard gain
Note that between each test the user may need to execute “HCI_EXT_EndModemTest”.