Owner's manual

AiP-N series 16CH/9CH/4CH Manual

Chapter 5: PTZ

If the camera is a Pan, Tilt and Zoom (PTZ) camera, you can control it via the following methods:

a. Via front panel

Select required channel

Use direction arrows to pan and tilt around the image

To zoom, use alternative method

b. Via remote control

Select required channel

Use direction arrows to pan and tilt around the image

Use and keys to zoom around the image

To send a dome to a preset position, press ‘preset’, followed by the number required. For example, for

preset 3, press ‘preset’ followed by ‘003’.

Press auto button to start auto pan tour

To deactivate the tour, press ‘auto’ again

c. Via keyboard

Select required channel

Use joystick (left, right, up and down) to pan and tilt around the image

Twist the joystick to zoom around the image

To send dome to a preset position, press numerical key followed by ‘preset’ For example, 5 followed by

‘preset’.

Press ‘auto pan’ to start auto pan tour

To deactivate the tour, press ‘auto pan’ again

d. Via touch screen monitor/ mouse

Select required channel