Owner's manual

AiP-N series 16CH/9CH/4CH Manual

To setup an AiP camera, follow these instructions.

 Camera IP address: the IP address of the AiP camera

 Camera HTTP port: the HTTP port number of the IP address (default 80)

 Video RTSP port: the RTSP port number of the IP address (default 554)

 Username: username of the AiP camera (default: admin)

 Password: password of the AiP camera (default: pass)

1.1-8 WS-Discovery

Web Services Dynamic Discovery (WS-Discovery) is part of the ONVIF protocol for searching AiP cameras

on a LAN.

Use this utility to scan the LAN

After scanning, assign the relevant cameras to a channel by selecting channel number in right hand camera

column

‘Get Snap’ will take an image for each listed camera to make identification easier.

Set IP: