Owner's manual

AiP-N series 16CH/9CH/4CH Manual

1. Plug in a portable USB disk at the NVR’s USB port

2. Press Enter to start firmware update

3. After the transfer has finished, remove the USB device and reboot the NVR.

4. Ensure that the firmware is located in the firmware directory of the USB disk

Export setup

The export setup feature allows a user to export internal configuration into a system file on the USB flash

disk’s firmware directory. The file can later be imported to other machines. The imported machine’s internal

configuration gets updated based on the original NVR’s configuration. To perform Export Setup, select

‘Export Setup’ and press Enter.

Import setup

To perform Import Setup feature, select ‘Import Setup’ and press Enter.

The configuration of the NVR is updated based on the system file

Firmware and kernel version

Version menu item indicates the current version number of the NVR

1.6-7 Language

The NVR provides multi-language OSD support. Users can change the preferred language to operate the

NVR.

Press Left or Right to change the language setting

1.6-8 Audio volume

To turn on or off live audio volume monitoring, set Live Audio option.

1.6-9 Health check

The NVR can perform a system check on the following areas:

 Temp Monitor

 NVR internal temperature

indicator

 FAN Monitor

 Fan failure indicator

 HDD Write Speed

 HDD writing speed indictor

 HDD Read Speed

 HDD reading speed indictor