Nationwide Customer Service Phone Fax Email Web ©2012 Ergomotion Inc V_003 12/2012 1.888.550.3746 1.805.979.9399 info@ergomotion.us www.ergomotion.
table of contents Safety Precautions and Usage Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Base Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Quick Reference Guide . . . . .
safety precautions and usage statements not advised to allow children and small pets to play on or under the bed. Children should not operate the bed base without adult supervision. Safety Features: Casters (optional leg accessory) are equipped with locking wheels to prevent unwanted movement. Even when locked and unable to roll, it is possible for the casters to slide.
quick reference guide base overview Not to scale. For illustration purposes only. Read all instructions before beginning installation. Power Down Box Control Box Control Box Power Supply (E) Power Cord (D) Head Massage Foot Massage connection ports to head and foot motors (massage and lift). Installed under the base.
installation guide installation guide Always use two people when setting up the base. STEP 1 Remove the binding straps and packing materials, making sure not to puncture the box with any sharp objects. STEP 9 Uncoil input cord (connected to control box’s power port) and plug into Power Supply. STEP 3 Place the bed base box in a desired location with the bottom of the box facing up. STEP 5 To install headboard brackets: See detailed installation instructions on page 10-11.
remote control remote control REMOTE OVERVIEW MASSAGE FEATURE ADJUST ONE TOUCH BUTTONS 10, 20, 30 Minute Massage Timer Lights Head Massage On/Off (6 intensities) Timer/All Off TV/PC Preset Position Foot Massage On/Off (6 intensities) Lounge Preset Position Massage All On/Off (3 intensities) Flat Preset Position Lifts and Lowers Foot Lifts and Lowers Head Zero-G Preset Position The MASSAGE button activates head and foot massage. Press 3 times to cycle through different intensities.
headboard bracket installation guide headboard bracket installation guide A 9/16” & 1/2” socket and crescent wrench are necessary to complete installation. STEP 1 10 STEP 2 a.) Align the hole in the bracket to the brass sleeve into which the leg threads. Hold the bracket in place and screw the leg into the base until it is snug. DO NOT OVERTIGHTEN. Too much force may cause the leg to spin freely. Attach the plastic spacer and T-Bracket.
emergency power down box pair remote In the event that the base is stuck in an articulated position during a power outage- the Power Down Box will return the base to a flat position. The original remote that comes in the box is already paired to the bed base. No further action is required. (2) 9 Volt batteries are required to operate the power down feature and are NOT included. In the event that the remote is not paired with the base, follow the steps below.
setting up two bases setting up two bases If any split setup is being installed, plastic connecting straps are provided (one per base) to secure the bases together. Use both straps to secure the head and foot portions together. If simultaneous operation of two bases is desired, use the SmartSync™ Cord to connect the electronics of both bases together. STEP 1 With the bases in their desired location, slightly loosen both legs to allow the strap to fit on the leg bolt, between the leg washer and frame.
troubleshooting If one or more functions on the bed base have stopped operating: • Check under the bed base to verify that the wired connections are secure and that there are no cords or bedding obstructing the movement of the base. • Check to ensure the green LED light is illuminated on the control box. If there is no light, verify that the input and power cords are properly connected. • Unplug the base for 1 hour to reset the electronic components.
