User Manual

AcuBrite™ Manual User’s Manual
Installing TouchKit Touch Screen Controller
TouchKit is the software which contains drivers of the touch
panel controllers.
Follow these steps to install TouchKit.
1. Insert the CD to CD-ROM.
2. Choose the appropr e OS (for example, if you are
using windows 2000 or XP, choose Win2000 / XP)
3. Follow the on-screen instructions to complete the
installation.
onfiguration Utility
in TouchKit utility, and they
e General, Setting, Edge coefficient, Monitors and
nt functions for
rs can easily
General property page contain
lower section is Double Click
 Edge Coefficient property page contains the
Tro
In t
che
wh
pro
Vid
consul
Troubleshoo ure. Do not exceed the maximum
refresh rate recommended for the display.
Problem bleshootin
iat
C
There are five property pages
ar
About. Each property page contains differe
users to do the adjustments. Therefore use
manage all the TouchKit controllers through TouchKit utility.
 s the functions of
d/remove, 4 points
Advanced.
 There are three functional groups in Setting property
page, and at the upper section of the property
language selection, devices ad
calibration, Draw test and
page
is sound option; at the middle section is Mouse
Mode; and at the
Adjustment.
functions of Edge Compensation for Top, Bottom,
Left, Right, X Axis and Y Axis.
 There are three functions in Monitors property page,
and they are Multiple Monitors, Split Monitors and
One Point Calibration.
 About contains the information about TouchKit
Page 13
eshooting Tips ubl
he event that you experience trouble with your Display,
the following items before contacting the dealer from
the Display was purchased. The most common
ck
om
blems usually involve an incorrect connection from the
eo Card to the Display. We recommend that you also
t your Video Card User’s manual during the
ting Proced
Trou g Tip
No ima e on display
screen
 Check that r cord of Computer has been
ed
c
eck that s
en press play
is lit.
that
has
co
rd
Card
g
powe
connected
extension
securely into wall outlet or ground
able or strip.
 Ch
be
power switch of the Display ha
ed and LED on the front of Dis
 Check
Display
Video(Signal) cable from the
been securely and correctly
nnected.
eck that
slot of Com erboard.
 Check that the video input from the Video
falls within the timing range
 Ch Video Card is firmly seated in ca
puter moth
Abnormal image
 Check that the video input from the Video Card
falls within the timing range.
 Check that Video(Signal)Cable from the
been securely and correctly
ected to the video connector at the rear
side of the Computer.
Display has
conn
Colors of image on
screen are abnormal
 C
dis
heck that Video(Signal)Cable from the
plays has been securely and correctly
the connected to the 15-pin Video Connector at
rear side of the computer
Disturbances on
screen
 OSD adjustment is incorrect. Please consult
section for OSD screen adjustment procedures.
Page 14