User's Guide

Rev. 1
HEXAPAD 10 BC USB
8.5.4.12 gen2accesspassword - EPC Gen2 tag access password
Command
gen2accesspassword value
Function
Check (no value) or change the "Access password" parameter of the Gen2 pattern.
Description
Is the 32-bit (8-digit) password of the hex tag.
Pattern
00000000
Values
00000000 .. ffffff
Notes
To read the reserved memory bank of the tag with the tagop command, the password must
be the same as the tag.
Example
To check access passrowd:
gen2accesspassword<CR>
00000000<CR>
To change the password to 12345678:
gen2accesspassword 12345678<CR>
ok - parameter has been
changed.<CR>
Errors
When the value reported is not among the specified:
error - value out of range<CR>
When more than one value is passed to the command:
error - too many args.<CR>
NOTE:
To read the protected memory region of the tag, Reserved, the tag access
password must be reported to the reader via this command.