User's Guide

Rev. 1
HEXAPAD 10 BC USB
8.5.4.23 enablecapslock - Shortcut to change read mode
Command
enablecapslock value
Function
Check (no value) or change the use of the shortcut to change read mode.
Description
Enables or disables the use of the "CapsLock" 5x quick-type key, to switch from
Standalone to Transparent mode and vice versa.
Pattern
Off
Values
on
off
Notes
This functionality works only and Windows and Linux operating systems. Alternative to
exit transparent mode is to send the command "$ off<CR>" to the reader.
Example
To check the value:
enablecapslock<CR>
off<CR>
To change the value to enable shortcut use:
enablecapslock on<CR>
ok - parameter has been changed.<CR>
Errors
When the value reported is not among the specified:
error - value out of range<CR>
When more than one value is passed to the command:
error - too many args.<CR>
NOTE:
For more details on changing the reader's operating mode please refer To 8.4
Switching standalone mode to Transparent and vice versa.