User's Guide

Rev. 1
HEXAPAD 10 BC USB
8.5.4.24 help - Help on commands
Command
help value
Function
Lists all commands (no value) or shows detailed help to the last command.
Description
For detailed help on a particular command just type: "help command<CR>".
Example
To check the commands accepted by the reader:
help<CR>
command list... <CR>
For detailed help on the tagop command:
help tagop<CR>
Command:tagop arg<CR>
Description: Get (no arguments) or set the read tag operation.<CR>
Arguments: reserved:wp:wl Reserved bank.*<CR>
epc:wp:wlEPC bank.*<CR>
tid:wp:wlTID bank.*<CR>
user:wp:wlUser bank.*<CR>
autoidAutoid tags.<CR>
noneNo tagop.<CR>
* wp - word pointer, wl - word length, max 32, menbank:0:0 entire bank.
Default: none<CR>
Errors
When the value reported is not among the specified:
error - command not found<CR>
When more than one value is passed to the command:
error - too many args.<CR>