User's Guide

Rev. 1
HEXAPAD 10 BC USB
8.5.4.27 upgradefirmware - Firmware update
Command
upgradefirmware
Function
Starts the reader firmware update process.
Example
To check the commands accepted by the reader:
help<CR>
command list... <CR>
>upgradefirmware
!!! Bootloader will be executed !!! The reader will be restarted.
Errors
When a value is passed to the command:
error - too many args.<CR>
Beep and Green and Red LED
flash fast simultaneously 3 times
and then the green and red LED
remain lit continuously to warn
you that it is in the process of
updating firmware.