Owner's Manual Owner manual

Gauges
Trip Meter
SELECT
BUTTON
RESET
BUTTON
This meter shows the number of
miles (U.S.) or kilometers (Canada)
driven since you last reset it.
There are two trip meters: Trip A
and Trip B. Switch between these
displays by pressing the Select
button repeatedly. Each trip meter
works independently, so you can
keep track of two different distances.
When you turn the ignition switch
ON (II), what you last selected is
displayed.
To reset a trip meter, display it and
then press and hold the Reset button
until the number resets to "0.0".
Both trip meters will reset if the
vehicle's battery goes dead or is
disconnected.
Outside Temperature Indicator
This indicator displays the outside
temperature in Fahrenheit in U.S.
models, and in Centigrade in
Canadian models.
The temperature sensor is located in
the front bumper. Therefore, the
temperature reading can be affected
by heat reflection from the road sur-
face, engine heat, and the exhaust
from the surrounding traffic. This
can cause the temperature reading
not to be correct when your speed is
under 19 mph (30 km/h).
In certain weather conditions,
temperature readings near freezing
(32°F, 0°C) could mean that ice is
forming on the road surface.
Instruments and Controls
Main Menu
Table of Contents