Owner's Manual Owner manual

Keys and Locks
Replacing the Battery
When the remote transmitter's
battery begins to get weak, it may
take several pushes on the button to
lock or unlock the doors, and the
LED will not light. Replace the
battery as soon as possible.
Battery type: CR2025
To replace the battery, place a cloth
on the edge of the transmitter and
remove the upper half by carefully
prying on the edge with a small flat-
tip screwdriver.
BATTERY
Remove the old battery and note the
polarity. Make sure the polarity of
the new battery is the same (+ side
facing up), then insert it in the
transmitter.
Snap the two halves of the
transmitter case back together.
Instruments and Controls
Main Menu
Table of Contents