2005 TSX Online Reference Owner's Manual Use these links (and links throughout this manual) to navigate through this reference. For a printed owner's manual, click on authorized manuals or go to www.helminc.com. Contents Owner's Identification Form Introduction ......................................................................................................................................... i A Few Words About Safety....................................................................................
Main Menu Owner’s Identification This Owner’s Manual should be considered a permanent part of the vehicle and should remain with the vehicle when it is sold. OWNER This Owner’s Manual covers all models of the TSX. You may find descriptions of equipment and features that are not on your particular model. ADDRESS STREET CITY STATE/PROVINCE ZIP CODE/ POSTAL CODE V. I. N. DELIVERY DATE The information and specifications included in this publication were in effect at the time of approval for printing.
Main Menu Introduction Congratulations! Your selection of a 2005 Acura TSX was a wise investment. It will give you years of driving pleasure. One of the best ways to enhance the enjoyment of your new Acura is to read this manual. In it, you will learn how to operate its driving controls and convenience items. Afterwards, keep this owner’s manual in your vehicle so you can refer to it at any time. As you read this manual, you will find information that is preceded by a symbol.
Main Menu A Few Words About Safety Your safety, and the safety of others, is very important. And operating this vehicle safely is an important responsibility. To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others. Of course, it is not practical or possible to warn you about all the hazards associated with operating or maintaining your vehicle.
Main Menu Your Vehicle at a Glance DIGITAL CLOCK (P.141) AUDIO SYSTEM (P.112) MIRROR CONTROLS (P.88) DOOR LOCK SWITCH (P.75) HEATING/COOLING CONTROLS (P.100) POWER WINDOW SWITCHES (P.89) TRUNK RELEASE HANDLE (P.80) FUEL FILL DOOR RELEASE (P.154) 4 AUTOMATIC TRANSMISSION (P.170) MANUAL TRANSMISSION (P.168) HOOD RELEASE HANDLE (P.155) PARKING BRAKE LEVER (P.
Main Menu Your Vehicle at a Glance INSTRUMENT PANEL BRIGHTNESS (P. 68) Your Vehicle at a Glance HEADLIGHTS/ TURN SIGNALS (P. 66) WINDSHIELD WIPERS/WASHERS (P. 65) HAZARD WARNING BUTTON (P. 69) REMOTE AUDIO CONTROLS (P. 139) CRUISE CONTROLS (P. 143) REAR WINDOW DEFOGGER (P. 69) MOONROOF SWITCH (P. 92) VEHICLE STABILITY ASSIST SYSTEM OFF SWITCH (P. 181) HORN TILT/TELESCOPIC ADJUSTMENT (P.
Main Menu 6
Main Menu Driver and Passenger Safety Important Safety Precautions .......... 8 Your Vehicle’s Safety Features........ 9 Seat Belts ...................................... 10 Airbags .......................................... 11 Protecting Adults and Teens.......... 13 1. Close and Lock the Doors ...... 13 2. Adjust the Front Seats ............ 13 3. Adjust the Seat-Backs ............. 14 4. Adjust the Head Restraints .... 15 5. Fasten and Position the Seat Belts ......................................
Main Menu Table of Contents Important Safety Precautions You’ll find many safety recommendations throughout this section, and throughout this manual. The recommendations on this page are the ones we consider to be the most important. Always Wear Your Seat Belt A seat belt is your best protection in all types of collisions. Airbags are designed to supplement seat belts, not replace them.
Main Menu Table of Contents Your Vehicle’s Safety Features (3) (10) (8) (9) (1) (4) (9) (8) Some features do not require any action on your part. These include a strong steel framework that forms a safety cage around the passenger compartment; front and rear crush zones; a collapsible steering column; and tensioners that tighten the front seat belts in a crash.
Main Menu Table of Contents Your Vehicle’s Safety Features Seat Belts Your vehicle is equipped with seat belts in all seating positions. Your seat belt system also includes a light on the instrument panel to remind you and your passengers to fasten your seat belts. Not wearing a seat belt properly increases the chance of serious injury or death in a crash, even though your vehicle has airbags. Be sure you and your passengers always wear seat belts and wear them properly.
Main Menu Table of Contents Your Vehicle’s Safety Features Airbags Driver and Passenger Safety Your vehicle has a Supplemental Restraint System (SRS) with front airbags to help protect the heads and chests of the driver and a front seat passenger during a moderate to severe frontal collision (see page 24 for more information on how your front airbags work).
Main Menu Table of Contents Your Vehicle’s Safety Features The most important things you need to know about your airbags are: Airbags do not replace seat belts. They are designed to supplement the seat belts. Airbags offer no protection in rear impacts, or minor frontal or side collisions. Airbags can pose hazards. To do their job, airbags must inflate with tremendous force.
Main Menu Table of Contents Protecting Adults and Teens See pages 30 − 47 for important guidelines on how to properly protect infants, small children, and larger children who ride in your vehicle. 1.Close and Lock the Doors After everyone has entered the vehicle, be sure the doors are closed and locked. Locking the doors reduces the chance of someone being thrown out of the vehicle during a crash, and it helps prevent passengers from accidentally opening a door and falling out. 2.
Main Menu Table of Contents Protecting Adults and Teens If you sit too close to the steering wheel or dashboard, you can be seriously injured by an inflating front airbag, or by striking the steering wheel or dashboard. The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest. In addition to adjusting the seat, you can adjust the steering wheel in and out (see page 70 ).
Main Menu Table of Contents Protecting Adults and Teens 4.Adjust the Head Restraints Adjust the seat-back to an upright position, and sit well back in the seat. Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant’s chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured. The farther a seat-back is reclined, the greater the risk of injury.
Main Menu Table of Contents Protecting Adults and Teens This spreads the forces of a crash over the strongest bones in your upper body. 5.Fasten and Position the Seat Belts Insert the latch plate into the buckle, then tug on the belt to make sure the belt is securely latched. Check that the belt is not twisted, because a twisted belt can cause serious injuries in a crash. Improperly positioning the seat belts can cause serious injury or death in a crash.
Main Menu Table of Contents Protecting Adults and Teens RELEASE BUTTONS Never place the shoulder portion of a lap/shoulder belt under your arm or behind your back. This could cause If a seat belt does not seem to work properly, it may not protect the occupant in a crash. No one should sit in a seat with an inoperative seat belt. Using a seat The front seats have adjustable seat belt anchors.
Main Menu Table of Contents Protecting Adults and Teens In addition, an occupant who is out of position in the front seat can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag. Advice for Pregnant Women This will reduce the risk of injuries to both you and your unborn child that can be caused by a crash or an inflating front airbag. Sitting improperly or out of position can result in serious injury or death in a crash.
Main Menu Table of Contents Protecting Adults and Teens Additional Safety Precautions Two people should never use the same seat belt. If they do, they Keep your hands and arms away from the airbag covers. If your hands or arms are close to an airbag cover, they could be injured if the airbag inflates. Do not put any accessories on seat belts. Devices intended to improve Do not attach or place objects on the front airbag covers.
Main Menu Table of Contents Additional Information About Your Seat Belts Seat Belt System Components Your seat belt system includes lap/ shoulder belts in all five seating positions. The front seat belts are also equipped with automatic seat belt tensioners. The seat belt system includes an indicator on the instrument panel and a beeper to remind you to fasten your seat belt. If you turn the ignition switch to ON (II) before fastening your belt, the beeper will sound and the indicator will flash.
Main Menu Table of Contents Additional Information About Your Seat Belts Automatic Seat Belt Tensioners The tensioners can also be activated during a collision in which the front airbags do not deploy. In this case, the airbags would not be needed, but the additional restraint could be helpful. For added protection, the front seat belts are equipped with automatic seat belt tensioners. When activated, the tensioners immediately tighten the belts to help hold the driver and a front passenger in place.
Main Menu Table of Contents Additional Information About Your Seat Belts If a seat belt is worn during a crash, it must be replaced by the dealer. A belt that has been worn during a crash may not provide the same level of protection in a subsequent crash. The dealer should also inspect the anchors for damage and replace them if needed. If the automatic seat belt tensioners activate during a crash, they must be replaced. For information on how to clean your seat belts, see page 223 .
Main Menu Table of Contents Additional Information About Your Airbags Airbag System Components Your airbag system includes: Two side airbags, one for the driver and one for a front passenger. The airbags are stored in the outer edges of the seatbacks. Both are marked ‘‘SIDE AIRBAG’’ (see page 25 ). Two side curtain airbags, one for each side of the vehicle. The airbags are stored in the ceiling above the side windows. The front and rear pillars are marked ‘‘SIDE CURTAIN AIRBAG’’ (see page 27 ).
Main Menu Table of Contents Additional Information About Your Airbags How Your Front Airbags Work During a frontal crash, your seat belt restrains your lower body and torso, and the airbag helps protect your head and chest. Although both airbags normally inflate within a split second of each other, it is possible for only one airbag to deploy. If you ever have a moderate to severe frontal collision, sensors will detect the vehicle’s rapid deceleration.
Main Menu Table of Contents Additional Information About Your Airbags After a crash, you may see what looks like smoke. This is actually powder from the airbag’s surface. Although the powder is not harmful, people with respiratory problems may experience some temporary discomfort. If this occurs, get out of the vehicle as soon as it is safe to do so. Dual-Stage Airbags Dual-Threshold Airbags Your front airbags are dual-stage airbags.
Main Menu Table of Contents Additional Information About Your Airbags How Your Side Airbags Work To get the best protection from the side airbags, front seat occupants should wear their seat belts and sit upright and well back in their seats. Side Airbag Cutoff System To reduce the risk of injury from an inflating side airbag, your vehicle has an automatic cutoff system for the passenger’s side airbag.
Main Menu Table of Contents Additional Information About Your Airbags How Your Side Curtain Airbags Work To get the best protection from the side curtain airbags, occupants should wear their seat belts and sit upright and well back in their seats. SIDE CURTAIN AIRBAG In a moderate to severe side impact, sensors will detect rapid deceleration and signal the control unit to instantly inflate the side curtain airbag on the driver’s or the passenger’s side of the vehicle.
Main Menu Table of Contents Additional Information About Your Airbags If you see any of these indications, the airbags and seat belt tensioners may not work properly when you need them. Ignoring the SRS indicator can result in serious injury or death if the airbag systems or tensioners do not work properly. Have your vehicle checked by a dealer as soon as possible if the SRS indicator alerts you to a possible problem. How the Side Airbag Off Indicator Works U.S.
Main Menu Table of Contents Additional Information About Your Airbags Additional Safety Precautions Do not attempt to deactivate your airbags. Together, airbags and or covering front seat-back covers can prevent your side airbags from inflating during a side impact. Driver and Passenger Safety seat belts provide the best protection. Do not cover or replace front seatback covers without consulting your dealer. Improperly replacing Do not tamper with airbag components or wiring for any reason.
Main Menu Table of Contents Protecting Children − General Guidelines All Children Must Be Restrained Each year, many children are injured or killed in vehicle crashes because they are either unrestrained or not properly restrained. In fact, vehicle accidents are the number one cause of the death of children ages 12 and under. Children depend on adults to protect them. However, despite their best intentions, many adults do not know how to properly protect child passengers.
Main Menu Table of Contents Protecting Children − General Guidelines Children who ride in back are less likely to be injured by striking interior vehicle parts during a collision or hard braking. Also, children cannot be injured by an inflating front airbag when they ride in the back. The Passenger’s Front Airbag Poses Serious Risks Front airbags have been designed to help protect adults in a moderate to severe frontal collision.
Main Menu Table of Contents Protecting Children − General Guidelines To remind you of the passenger’s front airbag hazards, and that children must be properly restrained in a back seat, your vehicle has warning labels on the dashboard (U.S. models) and on the front visors. Please read and follow the instructions on these labels. U.S.
Main Menu Table of Contents Protecting Children − General Guidelines Place the largest child in the front seat, provided the child is large enough to wear the lap/shoulder belt properly (see page 44 ). Move the vehicle seat as far to the rear as possible (see page 13 ). If a Child Requires Close Attention Many parents say they prefer to put an infant or small child in the front passenger seat so they can watch the child, or because the child requires attention.
Main Menu Table of Contents Protecting Children − General Guidelines Additional Safety Precautions Never hold an infant or child on your lap. If you are not wearing a seat belt in crash, you could be thrown forward and crush the child against the dashboard or a seat-back. If you are wearing a seat belt, the child can be torn from your arms and be seriously hurt or killed. Never put a seat belt over yourself and a child.
Main Menu Table of Contents Protecting Infants and Small Children Protecting Infants Do not put a rear-facing child seat in a forward-facing position. If placed facing forward, an infant could be very seriously injured during a frontal collision. Child Seat Type An infant must be properly restrained in a rear-facing, reclining child seat until the child reaches the seat maker’s weight or height limit for the seat and the child is at least one year old.
Main Menu Table of Contents Protecting Infants and Small Children In any situation, we strongly recommend that you install the child seat directly behind the front passenger’s seat, move the seat as far forward as needed, and leave it unoccupied. Or, you may wish to get a smaller rear-facing child seat. Protecting Small Children Child Seat Placement We strongly recommend placing a forward-facing child seat in a back seat, not the front.
Main Menu Table of Contents Protecting Infants and Small Children, Selecting a Child Seat Selecting a Child Seat When buying a child seat, you need to choose either a conventional child seat, or one designed for use with the Lower Anchors and Tethers for Children (LATCH) system. Placing a forward-facing child seat in the front seat can result in serious injury or death if the front airbag inflates.
Main Menu Table of Contents Selecting a Child Seat, Installing a Child Seat 3. The child seat should fit the vehicle seating position (or positions) where it will be used. Before purchasing a conventional child seat, or using a previously purchased one, we recommend that you test the seat in the specific vehicle seating position, or positions, where the seat will be used.
Main Menu Table of Contents Installing a Child Seat The lower anchors are located between the seat-back and seat bottom, and are to be used only with a child seat designed for use with LATCH. The location of each lower anchor is indicated by a small button above the anchor point. LOWER ANCHOR MARKS To install a LATCH-compatible child seat: 1. Move the seat belt buckle or tongue away from the lower anchors. 2.
Main Menu Table of Contents Installing a Child Seat TETHER STRAP HOOK Flexible type Other LATCH-compatible seats have a flexible-type connection as shown above. 4. Whatever type you have, follow the child seat maker’s instructions for adjusting or tightening the fit. TETHER ANCHORAGE POINTS 5. Lift the head restraint (see page 84 ), then route the tether strap through the legs of the head restraint, over the seat-back, making sure the strap is not twisted. 6.
Main Menu Table of Contents Installing a Child Seat In addition, the lap/shoulder belts in all seating positions except the driver’s have a locking mechanism that must be activated to secure a child seat. 1. With the child seat in the desired seating position, route the belt through the child seat according to the seat maker’s instructions, then insert the latch plate into the buckle. 2.
Main Menu Table of Contents Installing a Child Seat To deactivate the locking mechanism and remove a child seat, unlatch the buckle, unroute the seat belt, and let the belt fully retract. 4. After confirming that the belt is locked, grab the shoulder part of the belt near the buckle and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure.
Main Menu Table of Contents Installing a Child Seat Installing a Child Seat with a Tether Using an Outer Anchor TETHER STRAP HOOK Using the Center Anchor TETHER STRAP HOOK Outer COVER A child seat with a tether can be installed in any seating position in the back seat, using one of the anchorage points shown above. Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available. TETHER ANCHORAGE POINT 1.
Main Menu Table of Contents Protecting Larger Children When a child reaches the recommended weight or height limit for a forward-facing child seat, the child should sit in a back seat on a booster seat and wear a lap/shoulder belt. Allowing a child age 12 or under to sit in front can result in injury or death if the passenger’s front airbag inflates.
Main Menu Table of Contents Protecting Larger Children 3. Does the shoulder belt cross between the child’s neck and arm? Using a Booster Seat 5. Will the child be able to stay seated like this for the whole trip? If you answer yes to all these questions, the child is ready to wear the lap/shoulder belt correctly. If you answer no to any question, the child needs to ride on a booster seat.
Main Menu Table of Contents Protecting Larger Children When Can a Larger Child Sit in Front The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in a back seat. If the passenger’s front airbag inflates in a moderate to severe frontal collision, the airbag can cause serious injuries to a child who is unrestrained, improperly restrained, sitting too close to the airbag, or out of position. A side airbag also poses risks.
Main Menu Table of Contents Protecting Larger Children Additional Safety Precautions Do not let a child wear a seat belt across the neck. This could result Do not let a child put the shoulder part of a seat belt behind the back or under the arm. This could improve a child’s comfort or reposition the shoulder part of a seat belt can make the belt less effective and increase the chance of serious injury in a crash. Driver and Passenger Safety in serious neck injuries during a crash.
Main Menu Table of Contents Carbon Monoxide Hazard Your vehicle’s exhaust contains carbon monoxide gas. You should have no problem with carbon monoxide entering the vehicle in normal driving if you maintain your vehicle properly. Have the exhaust system inspected for leaks whenever: Carbon monoxide gas is toxic. Breathing it can cause unconsciousness and even kill you. Avoid any enclosed areas or activities that expose you to carbon monoxide. The vehicle is raised for an oil change.
Main Menu Table of Contents Safety Labels HOOD RADIATOR CAP DASHBOARD U.S. models only Driver and Passenger Safety These labels are in the locations shown. They warn you of potential hazards that could cause serious injury. Read these labels carefully. If a label comes off or becomes hard to read, contact your dealer for a replacement. On models with side curtain airbags U.S.
Main Menu Table of Contents Safety Labels SUN VISOR DOORJAMBS U.S. models U.S. models Canadian models Canadian models On cars with side curtain airbags U.S.
Main Menu Instruments and Controls This section gives information about the controls and displays that contribute to the daily operation of your vehicle. All the essential controls are within easy reach. Emergency Trunk Opener ......... 81 Trunk Main Switch...................... 81 Seat Heaters ..................................... 82 Seat .................................................... 83 Power Seat Adjustment .............. 83 Driver’s Lumbar Support ............ 83 Head Restraints ................
Main Menu Table of Contents Control Locations INDICATORS (P.53) GAUGES (P.60) DIGITAL CLOCK (P.141) MIRROR CONTROLS (P.88) AUDIO SYSTEM (P.112) DOOR LOCK SWITCH (P.75) HEATING/COOLING CONTROLS (P.100) POWER WINDOW SWITCHES (P.89) AUTOMATIC TRANSMISSION (P.170) MANUAL TRANSMISSION (P.168) TRUNK RELEASE HANDLE (P.80) FUEL FILL DOOR RELEASE (P.154) HOOD RELEASE HANDLE (P.155) 52 PARKING BRAKE LEVER (P.
Main Menu Table of Contents Instrument Panel DOOR AND TRUNK OPEN MONITOR (P.56) CRUISE CONTROL INDICATOR (P.59) IMMOBILIZER SYSTEM INDICATOR (P.59) LIGHTS ON INDICATOR (P.57) HIGH BEAM INDICATOR (P.58) VEHICLE STABILITY ASSIST (VSA) SYSTEM INDICATOR (P.56) VSA ACTIVATION INDICATOR (P.56) LOW FUEL INDICATOR (P.57) ANTI-LOCK BRAKE SYSTEM MAINTENANCE REQUIRED SEAT BELT INDICATOR (P.55) (P.62) INDICATOR REMINDER PARKING BRAKE AND BRAKE CHARGING SYSTEM LIGHT (P.54) SECURITY SYSTEM INDICATOR (P.
Main Menu Table of Contents Instrument Panel Lights The instrument panel has many indicators to give you important information about your vehicle. Seat Belt Reminder Light This indicator comes on when you turn the ignition switch to ON (II). It reminds you and your passengers to fasten your seat belts. A beeper also sounds if you have not fastened your seat belt. If you turn the ignition switch to ON (II) before fastening your seat belt, the beeper sounds and the indicator flashes.
Main Menu Table of Contents Instrument Panel Lights U.S. Canada Side Airbag Off Indicator This indicator comes on when you turn the ignition switch to ON (II). If it comes on at any other time, it indicates that the passenger’s side airbag has automatically shut off. For more information, see page 28 . Anti-lock Brake System (ABS) Indicator This indicator normally comes on for a few seconds when you turn the ignition switch to ON (II), and when the ignition switch is turned to START (III).
Main Menu Table of Contents Instrument Panel Lights Vehicle Stability Assist (VSA) System Indicator This indicator normally comes on for a few seconds when you turn the ignition switch to ON (II). If it comes on and stays on at any other time, or it does not come on when you turn the ignition switch to ON (II), there is a problem with the VSA system. Have your vehicle checked by your Acura dealer.
Main Menu Table of Contents Instrument Panel Lights When you turn on the Hazard Warning button, both turn signal indicators blink. All turn signals on the outside of the vehicle should flash. Lights On Indicator This indicator reminds you that the exterior lights are on. It comes on when the light switch is in either the or position. This indicator will also come on when the light switch is in AUTO and the lights turn on automatically.
Main Menu Table of Contents Instrument Panel Lights Security System Indicator SECURITY SYSTEM INDICATOR ‘‘Daytime Running Lights’’ Indicator Canadian models only This indicator comes on when you turn the ignition switch to ON (II) with the headlight switch off and the parking brake set. It should go off if you turn on the headlights or release the parking brake. If it comes on at any other time, it means there is a problem with the DRL. There may also be a problem with the high beam headlights.
Main Menu Table of Contents Instrument Panel Lights Cruise Control Indicator This indicator comes on when you set the cruise control. See page 143 for information on operating the cruise control. Immobilizer System Indicator This indicator comes on for a few seconds when you turn the ignition switch to ON (II). It will go off if you have inserted a properly-coded ignition key. If it is not a properlycoded key, the indicator will blink and the engine will not start (see page 72 ).
Main Menu Table of Contents Gauges OUTSIDE TEMPERATURE INDICATOR TACHOMETER ODOMETER SPEEDOMETER FUEL GAUGE TEMPERATURE GAUGE SELECT/RESET KNOB TRIP METER MAINTENANCE REQUIRED INDICATOR U.S. model is shown. Odometer The odometer shows the total distance your vehicle has been driven. It measures miles in U.S. models and kilometers in Canadian models. It is illegal under U.S.
Main Menu Table of Contents Gauges When the temperature reaches the desired value, release the Select/ Reset knob. You should see the new outside temperature displayed. In certain weather conditions, temperature readings near freezing (32°F, 0°C) could mean that ice is forming on the road surface. Trip Meter This meter shows the number of miles (U.S.) or kilometers (Canada) driven since you last reset it. There are two trip meters: Trip A and Trip B.
Main Menu Table of Contents Gauges Fuel Gauge This shows how much fuel you have. It may show slightly more or less than the actual amount. The needle returns to the bottom after you turn off the ignition. Avoid driving with an extremely low f uel level. Running out of f uel could cause the engine to misf ire, damaging the catalytic converter.
Main Menu Table of Contents Gauges For the first 8,000 miles (12,800 km) after the Maintenance Required Indicator is reset, it will come on for 2 seconds when you turn the ignition switch to ON (II). Your dealer will reset this indicator after completing the scheduled maintenance. If this maintenance is done by someone other than your dealer, reset the indicator as follows.
Main Menu Table of Contents Controls Near the Steering Wheel HEADLIGHTS/TURN SIGNALS (P. 66) INSTRUMENT PANEL BRIGHTNESS (P. 68) WINDSHIELD WIPERS/WASHERS (P. 65) HAZARD WARNING BUTTON (P. 69) REMOTE AUDIO CONTROLS (P. 139) CRUISE CONTROLS (P. 143) REAR WINDOW DEFOGGER (P. 69) MOONROOF SWITCH (P. 92) VEHICLE STABILITY ASSIST SYSTEM OFF SWITCH (P. 181) 64 TILT/TELESCOPIC ADJUSTMENT (P.
Main Menu Table of Contents Wipers and Washers Windshield Wiper Push the right lever up or down to select a position. LO − The wipers run at low speed. HI − The wipers run at high speed. MIST − The wipers run at high speed until you release the lever. 1. MIST 2. OFF 3. INT − Intermittent 4. LO − Low speed 5. HI − High speed 6. Windshield Washers INT − The length of the wiper interval is varied automatically according to the vehicle’s speed. Vary the delay by turning the INT TIME ring.
Main Menu Table of Contents Turn Signal, Headlights Turn Signal and Headlights 1. Turn Signal 2. Off 3. Parking and interior lights 4. Headlight on 5. High beams 6. Flash high beams 66 Turn Signal − Push down on the left lever to signal a left turn and up to signal a right turn. To signal a lane change, push lightly on the lever in the proper direction and hold it. The lever will return to center when you release it or complete a turn.
Main Menu Table of Contents Headlights, Automatic Lighting Off Feature Automatic Lighting Off Feature This feature turns off the headlights, parking lights, taillights, and license plate light within 15 seconds of removing the key from the ignition switch and closing the driver’s door. This feature activates if you leave the headlight switch in the or position, remove the key, then open and close the driver’s door.
Main Menu Table of Contents Daytime Running Lights, Instrument Panel Brightness Daytime Running Lights (Canadian Models) With the headlight switch off, the high beam headlights and the high beam indicator come on with reduced brightness when you turn the ignition switch to ON (II) and release the parking brake. They remain on until you turn the ignition switch off, even if you set the parking brake. The headlights revert to normal operation when you turn them on with the switch.
Main Menu Table of Contents Hazard Warning, Rear Window Defogger Hazard Warning Rear Window Defogger Push the button between the center vents to turn on the hazard warning lights (four-way flashers). This causes all four outside turn signals and both turn indicators in the instrument panel to flash. Use the hazard warning lights if you need to park in a dangerous area near heavy traffic, or if your vehicle is disabled.
Main Menu Table of Contents Steering Wheel Adjustment Make any steering wheel adjustment before you start driving. 4. Push the lever up to lock the steering wheel in that position. 5. Make sure you have securely locked the steering wheel in place by trying to move it up, down, in, and out. Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash. Adjust the steering wheel only when the vehicle is stopped. 1.
Main Menu Table of Contents Keys and Locks KEY NUMBER TAG MASTER KEY (BLACK) VALET KEY (LIGHT GREY) You should have received a key number tag with your keys. You will need this key number if you ever have to get a lost key replaced. Use only Acura-approved key blanks. The master key fits all the locks on your vehicle. The valet key works only in the ignition and the door locks.
Main Menu Table of Contents Immobilizer System The Immobilizer System protects your vehicle from theft. If an improperly-coded key (or other device) is used, the engine will not start. When you turn the ignition switch to ON (II), the Immobilizer System indicator should come on for a few seconds, then go out. If the indicator starts to blink, it means the system does not recognize the coding of the key.
Main Menu Table of Contents Ignition Switch The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), START (III) ACCESSORY (I) − You can operate the audio system and the accessory power sockets in this position. ON (II) − This is the normal key position when driving. Several of the lights on the instrument panel come on as a test when you turn the ignition switch from ACCESSORY (I) to ON (II). START (III) − Use this position only to start the engine.
Main Menu Table of Contents Ignition Switch, Door Locks You will hear a reminder beeper if you leave the key in the ignition switch in the LOCK (0) or ACCESSORY (I) position and open the driver’s door. Remove the key to turn off the beeper. Door Locks LOCK TAB If your vehicle has an automatic transmission, the shift lever must be in Park before you can remove the key from the ignition switch. Removing the key from the ignition switch while driving locks the steering.
Main Menu Table of Contents Door Locks Power Door Locks top MASTER DOOR LOCK SWITCH bottom You can open or close the windows by using the key in the driver’s door (see page 91 ). Lockout Prevention MASTER DOOR LOCK SWITCH Each front door has a master door lock switch. Either switch locks and unlocks all doors. On the driver’s door, push the top of the master door lock switch to lock all doors,; push the bottom to unlock them.
Main Menu Table of Contents Childproof Door Locks, Remote Transmitter Childproof Door Locks Remote Transmitter LED UNLOCK BUTTON LEVER The childproof door locks are designed to prevent children seated in the rear from accidentally opening the rear doors. Each rear door has a lock lever near the edge. With the lever in the LOCK position, the door cannot be opened from the inside regardless of the position of the lock tab. To open the door, pull the lock tab up, and use the outside door handle.
Main Menu Table of Contents Remote Transmitter You cannot lock the doors with the remote transmitter if any door is not fully closed or the key is in the ignition switch. To open the trunk, push the Trunk Release button for about 1 second. TRUNK − Press this button for about 1 second to open the trunk. You cannot open the trunk if the key is in the ignition switch. Remote Transmitter Care Avoid dropping or throwing the transmitter. Protect the transmitter from extreme temperature.
Main Menu Table of Contents Remote Transmitter Replacing the Transmitter Battery If it takes several pushes on the button to lock or unlock the doors, replace the battery as soon as possible. BATTERY Battery type: CR2025 To replace the battery: 1. Place a cloth on the edge of the transmitter, and remove the upper half by carefully prying on the edge with a small flat-tip screwdriver. 78 2. Remove the old battery and note the polarity.
Main Menu Table of Contents Remote Transmitter Instruments and Controls As required by the FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Main Menu Table of Contents Trunk Pull You can open the trunk in any of three ways: Pull up on the trunk release lever located to the left of the driver’s seat. Press and hold the trunk release button on the remote transmitter. If the doors are unlocked, press the trunk release button on the trunk lid. 80 MASTER KEY To close the trunk, press down on the trunk lid. See page 163 for cargo loading and weight limit information.
Main Menu Table of Contents Trunk Emergency Trunk Opener To open the trunk, push the release lever to the left. Trunk Main Switch As a safety feature, your vehicle has a release lever on the trunk latch so the trunk can be opened from the inside. To protect items in the trunk, you can disable the trunk-release lever by turning off the trunk main switch in the glove box, locking the glove box, and make sure the rear seat is not folded down.
Main Menu Table of Contents Seat Heaters After the seat reaches a comfortable temperature, select LO by pushing the back of the switch. This will keep the seat warm. In HI, the heater turns off when the seat gets warm, and turns back on after the seat’s temperature drops. In LO, the heater runs continuously. It does not cycle with temperature changes. Both front seats are equipped with seat heaters. Because of the sensors for the side airbag system, there is no heater in the passenger’s seatback.
Main Menu Table of Contents Seats Power Seat Adjustment Driver’s Lumbar Support See pages 13 − 14 for important safety information and warnings about how to properly position seats and seat-backs. Moves the seat forward and backward. Driver’s seat only: Moving the long horizontal switch adjusts the seat bottom in several directions. The seat bottom adjusts in the direction you move the switch. The short vertical switch adjusts the seat back angle.
Main Menu Table of Contents Seats Head Restraints They are most effective when you adjust them so the back of the occupant’s head rests against the center of the restraint. The front and rear head restraints adjust for height. You need both hands to adjust the restraint. Do not attempt to adjust it while driving. To raise it, pull upward. To lower the restraint, push the release button and push the restraint down.
Main Menu Table of Contents Seats Folding Rear Seat MASTER KEY The back of the rear seat folds down, giving you direct access to the trunk. The seat-back can be released from inside the vehicle or inside the trunk. To fold down the seat-back from inside the vehicle, insert the master key in the lock on the rear shelf. Turn the key clockwise, pull down the top of the seat-back, then release the key.
Main Menu Table of Contents Seats Make sure all rear shoulder belts are positioned in front of the rear seatback whenever the seat-back is in its upright position. Make sure all items in the trunk, or items extending through the opening into the back seat, are secured. Loose items can fly forward and cause injury if you have to brake hard. See Carrying Cargo on page 162 . 86 Never drive with the seat-back folded down and the trunk lid open. See Carbon Monoxide Hazard on page 48 .
Main Menu Table of Contents Mirrors OFF BUTTON INDICATOR Instruments and Controls The inside mirror can automatically darken to reduce glare. To turn on this feature, press the AUTO button on the bottom of the mirror. The indicator comes on as a reminder. When it is on, the mirror darkens when it senses the headlights of a vehicle behind you, then returns to normal visibility when the lights are gone. Press the OFF button to turn off this feature.
Main Menu Table of Contents Mirrors Adjusting the Power Mirrors 3. Push or pull the adjustment knob right, left, up, or down to move the mirror. Power Mirror Heaters HEATED MIRROR BUTTON 4. When you finish, turn the adjustment knob to the center (off) position. This turns off the adjustment knob to keep your settings. ADJUSTMENT KNOB 1. Turn the ignition switch to ON (II). 2. Turn the adjustment knob to L (driver’s side) or R (passenger’s side).
Main Menu Table of Contents Power Windows Closing a power window on someone’s hands or fingers can cause serious injury. MAIN SWITCH DRIVER’S WINDOW SWITCH To close the driver’s window fully, pull back the window switch firmly, then release it. To stop the window from going all the way up, push down on the window switch briefly. Turn the ignition switch to ON (II) to raise or lower any window, push the switch down and hold it. Release the switch when you want the window to stop.
Main Menu Table of Contents Power Windows To open or close the driver’s window partially, push down or pull back on the window switch lightly and hold it. The window will stop when you release the switch. The passenger windows cannot be raised or lowered if the MAIN switch is OFF. Keep the MAIN switch off when you have children in the vehicle so they do not injure themselves by operating the windows unintentionally.
Main Menu Table of Contents Power Windows Power Window Control Operations UNLOCK BUTTON Opening the Windows with the Remote Transmitter You can open all of the windows from the outside with the remote transmitter. Open Close 1. Press the UNLOCK button once to unlock the driver’s door. 2. Press the UNLOCK button a second time, and hold it. The passenger’s doors unlock, and all four windows start to open. To stop the windows, release the button. 3. To open the windows further, press the button again.
Main Menu Table of Contents Power Windows, Moonroof 3. Turn the key clockwise again, and hold it. All four windows start to open. To stop the windows, release the key. Moonroof 4. To open the windows further, turn and hold the key again. To close: 1. Insert the key in the driver’s door lock. 2. Turn the key counterclockwise, then release it. 3. Turn the key counterclockwise again, and hold it. All four windows start to close. To stop the windows, release the key. 4.
Main Menu Table of Contents Moonroof, Parking Brake If you try to open the moonroof in below-f reezing temperatures, or when it is covered with snow or ice, you can damage the moonroof panel or motor. Parking Brake Driving the vehicle with the parking brake applied can damage the rear brakes and hubs. A beeper will sound if the vehicle is put into gear with the parking brake on. PARKING BRAKE LEVER To apply the parking brake, pull the lever up fully.
Main Menu Table of Contents Sun Visor, Vanity Mirror Sun Visor Vanity Mirror To use the sun visor, pull it down. You can also use the sun visor at the side window. Remove the support rod from the clip and swing the sun visor toward the side window. To use a vanity mirror on the back of the sun visor, pull up the cover. 94 The lights come on when you pull up the cover.
Main Menu Table of Contents Interior Lights Push on the spotlight lenses to turn the light on and off. Ceiling Light DOOR ACTIVATED DOOR ACTIVATED ON OFF COURTESY LIGHT The ceiling lights have a three or two-position switch; ON (for threeposition), Door Activated, and OFF. In the Door Activated (center or left) position, the lights come on when you: Open any door. Unlock the doors with the key or remote transmitter.
Main Menu Table of Contents Interior Convenience Items CONSOLE COMPARTMENT/ ACCESSORY POWER SOCKET FRONT DOOR POCKET/ BEVERAGE HOLDER CENTER POCKET UTILITY POCKET/ ACCESSORY POWER SOCKET GLOVE BOX CENTER ARMREST/ BEVERAGE HOLDERS TRUNK 96 BEVERAGE HOLDERS SEAT-BACK POCKETS
Main Menu Table of Contents Interior Convenience Items Spilled liquids can damage the upholstery, carpeting, and electrical components in the interior. Accessory Power Sockets These sockets are intended to supply power for 12 volt DC accessories that are rated 120 watts or less (10 amps). None of the sockets will power an automotive type cigarette lighter element. When more than one socket is being used, the combined power rating of the accessories should be 120 watts or less (10 amps).
Main Menu Table of Contents Interior Convenience Items Sunglasses Holder Glove Box An open glove box can cause serious injury to your passenger in a crash, even if the passenger is wearing the seat belt. Always keep the glove box closed while driving. GLOVE BOX To open the sunglasses holder, push on the front edge. Make sure the holder is closed while you are driving. Open the glove box by pulling the handle to the left. Close it with a firm push. Lock or unlock the glove box with the master key.
Main Menu Features Your Acura has an anti-theft audio system that requires a code number to enable it. The security system helps to discourage vandalism and theft of your Acura. The standard audio system has many features. This section describes those features and how to use them. Playing the XMTM Satellite Radio ....................................... 133 Satellite Digital Radio ................ 133 To Play XMTM Satellite Radio.... 134 To Select a Channel................... 134 Satellite Radio Signals .
Main Menu Table of Contents Vents, Heating, and A/C Without Navigation System TEMPERATURE DISPLAY FAN CONTROL BAR A/C BUTTON MODE BUTTON FAN SPEED INDICATOR TEMPERATURE CONTROL BAR (PASSENGER’S SIDE) TEMPERATURE CONTROL BAR (DRIVER’S SIDE) AUTO BUTTON OFF BUTTON DUAL BUTTON REAR WINDOW DEFOGGER BUTTON WINDSHIELD DEFROST BUTTON RECIRCULATION BUTTON 100
Main Menu Table of Contents Vents, Heating, and A/C With Navigation System TEMPERATURE DISPLAY AIR CONDITIONING ICONS Features TEMPERATURE CONTROL BAR (DRIVER’S SIDE) TEMPERATURE CONTROL BAR (PASSENGER’S SIDE) AUTO BUTTON RECIRCULATION BUTTON WINDSHIELD DEFROST BUTTON REAR WINDOW DEFOGGER BUTTON OFF BUTTON DUAL BUTTON A/C BUTTON MODE ICONS FAN CONTROL ICONS 101
Main Menu Table of Contents Vents, Heating, and A/C What Each Control Does See pages 107 − 108 for Automatic Climate Control and Manual Operations information. Fan Control Without the navigation system, you can manually select the fan speed by pressing the fan control buttons. The fan speed is represented by vertical bars in the display. 102 With the navigation system, you can manually select the fan speed by pressing the A/C button next to the display and then, pressing the fan control icons.
Main Menu Table of Contents Vents, Heating, and A/C Air Conditioning (A/C) Button On vehicles without the navigation system, press the A/C button to turn on the A/C. You will see A/C ON or A/C OFF in the display. When you turn the A/C off, the system cannot regulate the inside temperature if you set the temperature control buttons below the outside temperature. Rear Window Defogger Button This button turns the rear window defogger off and on (see page 69 ).
Main Menu Table of Contents Vents, Heating, and A/C Mode Control Use the mode control buttons or icons to select the vents the air flows from. Some air will flow from the dashboard corner vents in all modes. When you select or , the system automatically switches to Fresh Air mode and turns on the A/C. In these modes, the A/C stays on with the indicator off.
Main Menu Table of Contents Vents, Heating, and A/C Using the Heater The heater uses engine coolant to warm the air. If the engine is cold, it will be several minutes before you feel warm air coming from the system. Using the A/C Air conditioning places an extra load on the engine. Watch the engine coolant temperature gauge (see page 61 ). If it moves near the red zone, turn off the A/C until the gauge reads normally. With Navigation System Without navigation system 1.
Main Menu Table of Contents Vents, Heating, and A/C Dehumidify the Interior Air conditioning, as it cools, removes moisture from the air. When used in combination with the heater, it makes the interior warm and dry. 1. Turn the fan on. 2. Turn on the air conditioning. and Fresh Air mode. 3. Select 4. Adjust the temperature control to your preference. This setting is suitable for all driving conditions whenever the outside temperature is above 32°F (0°C).
Main Menu Table of Contents Vents, Heating, and A/C Automatic Climate Control The automatic climate control system adjusts the fan speed and airflow levels to maintain the interior temperature you select. Without Navigation System: Set the desired temperature by pressing the temperature control bars (▲ or ▼ side). You will see AUTO in the system’s display. With Navigation System: Set the desired temperature by pressing the temperature control bars (▲ or ▼ side).
Main Menu Table of Contents Vents, Heating, and A/C Manual Operation You can manually select various functions of the automatic climate control system when it is in AUTO. All other features remain automatically controlled. To Turn Everything Off Press the OFF button. However, a lack of airflow can cause the windows to fog up. You should keep the fan on at all times so stale air and moisture do not build up in the interior and cause fogging.
Main Menu Table of Contents Dual Temperature Control Your vehicle has two temperature control bars, one for the driver, and one for the passenger. DUAL BUTTON Temperature Control Bars Push AUTO or . The selected temperatures appear in the upper display. For vehicles with navigation system when the indicator in the DUAL button is off, you can adjust both sides to the same temperature by adjusting the driver’s side temperature control bar (▲ or ▼ side).
Main Menu Table of Contents Dual Temperature Control To set the driver’s side temperature to a different value than the passenger’s, press the DUAL button, then press the temperature control bars (▲ or ▼ side) on the driver’s side. To set the passenger’s side to a different value than the driver’s, press the temperature control bars (▲ or ▼ side) on the passenger’s side. You can adjust the passenger’s side without pressing the DUAL button first.
Main Menu Table of Contents Climate Control Sensors Sunlight Sensor/Temperature Sensor SUNLIGHT SENSOR TEMPERATURE SENSOR Features The climate control system has two sensors. A sunlight sensor is in the top of the dashboard, and a temperature sensor is next to the steering column. Do not cover the sensors or spill any liquid on them.
Main Menu Table of Contents Playing the Radio Without Navigation System AM/FM BUTTON STEREO INDICATOR A. SEL INDICATOR A.
Main Menu Table of Contents Playing the Radio With Navigation System UPPER DISPLAY Features PRESET ICONS SCAN ICON AUTO SELECT ICON PWR/VOL KNOB TUNE/SOUND KNOB SEEK/SKIP BAR SCAN BUTTON AUDIO DISPLAY BUTTON AM/FM BUTTON 113
Main Menu Table of Contents Playing the Radio To Play the Radio The ignition switch must be in the ACCESSORY (I) or ON (II) position. Turn the system on by pushing the PWR/VOL knob or the AM/FM button. Adjust the volume by turning the PWR/VOL knob. For Vehicles with Navigation System Pushing the AUDIO DISPLAY button will also turn on the system. The band and frequency that the radio was last tuned to is displayed. To change bands, press the AM/FM button.
Main Menu Table of Contents Playing the Radio Preset − Each preset button or icon can store one frequency on AM, and two frequencies on FM. The preset frequencies will be lost if your vehicle’s battery goes dead, is disconnected, or the radio fuse is removed. 4. Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM. Features 1. Select the desired band, AM or FM. FM1 and FM2 let you store two frequencies with each preset button or icon. 3.
Main Menu Table of Contents Playing the Radio AUTO SELECT − If you are traveling far from home and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area. Press the A. SEL button or touch the Auto Select icon. A. SEL will flash in the display, and the system will go into scan mode for several seconds. It stores the frequencies of six AM, and twelve FM stations in the preset buttons (1 − 6) or icons.
Main Menu Table of Contents Playing the Radio Balance/Fader − These two modes adjust the strength of the sound coming from each speaker. BAL adjusts the side-to-side strength, while FAD adjusts the front-to-back strength. Treble/Bass − Use the TRE/BAS modes to adjust the tone to your liking. On Vehicles with Navigation System If you want to adjust the sound while the radio/CD is playing, push the AUDIO DISPLAY button, then touch the SOUND icon in the display.
Main Menu Table of Contents Playing the Radio Radio Frequencies The radio can receive the complete AM and FM bands. Those bands cover these frequencies: AM band: 530 to 1,710 kilohertz FM band: 87.7 to 107.9 megahertz Radio stations on the AM band are assigned frequencies at least ten kilohertz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 megahertz apart (87.9, 88.1, 88.3). Stations must use these exact frequencies.
Main Menu Table of Contents Playing the Radio As required by the FCC: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Features Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills. Your radio then receives both the direct signal from the station’s transmitter, and the deflected signal. This causes the sound to distort or flutter.
Main Menu Table of Contents Playing a CD Without Navigation System CD BUTTON CD LOAD INDICATOR REPEAT BUTTON RANDOM BUTTON LOAD BUTTON 120 CD SLOT EJECT BUTTON
Main Menu Table of Contents Playing a CD With Navigation System UPPER DISPLAY Features TRACK REPEAT ICON DISC REPEAT ICON CH DISC ICONS RANDOM ICON CD LOAD INDICATOR EJECT BUTTON LOAD BUTTON SEEK/SKIP BAR SCAN BUTTON CD/AUX BUTTON CH DISC BAR AUDIO DISPLAY BUTTON CD SLOT 121
Main Menu Table of Contents Playing a CD, CD Changer To Play a CD To load or play CDs, the ignition switch must be in the ACCESSORY (I) or ON(II) position. You operate the CD player/CD changer with the same controls used for the radio. To select the CD player/CD changer, press the CD button. The number of the track playing is shown in the display. With the in-dash CD changer, the disc and track numbers are displayed. The system will continuously play a CD until you change modes.
Main Menu Table of Contents Playing a CD, CD Changer You can also load a CD into an empty position while a CD is playing. Select the empty position (the disc number indicator is not highlighted) and press the appropriate preset bar or touch a disc icon. The current CD stops playing and starts the loading sequence. The CD just loaded will play. You operate the CD changer with the same controls used for the radio. The numbers of the disc and track playing are shown in the display.
Main Menu Table of Contents Playing a CD, CD Changer For Vehicles without Navigation System to SEEK/SKIP − Push the play the next track on the disc. Push the once to replay the track in play, press twice to replay the previous track. To remove rapidly within a track, press and hold the , or the button. REPEAT − Press to continuously replay a track. You will see RPT in the display. Press the RPT button again to turn it off. RANDOM − Press to play the tracks in random order.
Main Menu Table of Contents Playing a CD, CD Changer DISC RPT − Touch the icon to continuously replay the current CD. Touch again to turn it off. TRACK RDM − Touch the icon to play the current CD in random order. Touch again to stop. To Stop Playing a CD Press the eject button ( ) to remove the CD. If you eject the CD, but do not remove it from the slot, the system will automatically reload the CD after 15 seconds and put it in pause mode. To begin playing, press the CD button.
Main Menu Table of Contents CD Changer Error Messages If you see an error message in the display while playing a CD, find the cause in the chart to the right. If you cannot clear the error message, take the vehicle to your dealer. Error Message Cause FOCUS Error Mechanical Error No CD in the CD Changer High Temperature 126 Solution Press the CD eject button and pull out the CDs. Check for an error indication. Insert the CDs again.
Main Menu Table of Contents Protecting Your CDs General Information When using CD-R discs, use only high quality CDs labeled for audio use. CD-RW discs will not work in this unit. Play only standard round CDs. Odd-shaped CDs may jam in the drive or cause other problems. Handle your CDs properly to prevent damage and skipping. See this page. To clean a CD, use a clean soft cloth. Wipe across the CD from the center to the outside edge. A new CD may be rough on the inner and outer edges.
Main Menu Table of Contents Playing a Tape (Optional) Without Navigation System AM/FM BUTTON REPEAT INDICATOR REPEAT BUTTON CD/AUX BUTTON SEEK/SKIP BAR PWR/VOL KNOB 128 PRESET BUTTONS
Main Menu Table of Contents Playing a Tape (Optional) With Navigation System REPEAT INDICATOR TAPE DIRECTION INDICATOR Features REPEAT ICON PLAY/PROG ICON NR ICON PWR/VOL KNOB SEEK/SKIP BAR CD/AUX BUTTON CH DISC BAR AM/FM BUTTON AUDIO DISPLAY BUTTON 129
Main Menu Table of Contents Playing a Tape (Optional) To Play a Tape The ignition switch must be in ACCESSORY (I) or ON (II). Make sure the open side of the tape is facing right, then insert the tape most of the way into the slot. The system will pull the tape in the rest of the way, and begin to play it. The tape direction indicator will light to show you which side of the tape is playing. The ▲ indicates the side you inserted upward in now playing.
Main Menu Table of Contents Playing a Tape (Optional) Tape Search Functions Without Navigation System With Navigation System FF/REW − To rewind the tape push the upper side (▲) of the CH DISC bar. To fast forward the tape, push the lower side (▼) of the CH DISC bar. Press either side of the PROG icon in the audio display to take the system out of rewind or fast forward. If you see the error message ‘‘ ’’ on the display, press the tape eject button to remove the tape from the unit.
Main Menu Table of Contents Playing a Tape (Optional) Caring for the Tape and Player The tape player picks up dirt and oxides from the tape. This contamination builds up over time and causes the sound quality to degrade. To prevent this, you should clean the player after every 30 hours of use. If you do not clean the tape player regularly, it may eventually become impossible to remove the contamination with a normal cleaning kit. Your dealer has a cleaning kit available. Use 100-minute or shorter tapes.
Main Menu Table of Contents Playing the XMTM Satellite Radio Satellite Digital Radio U.S. Models only Your vehicle is capable of receiving XMTM Satellite Radio anywhere in the United States except Hawaii, Alaska, and Canada. with Navigation System SCAN BUTTON CATEGORY/CHANNEL MODE INDICATOR SRT RADIO BUTTON CATEGORY/CHANNEL MODE INDICATOR PWR/VOL PRESET ICONS KNOB UPPER DISPLAY SCAN ICON DISP BUTTON Satellite radio is available in U.S. models only.
Main Menu Table of Contents Playing the XMTM Satellite Radio To Play XMTM Satellite Radio The ignition must be in the ACCESSORY (I) or ON (II) position. Turn the system on: Vehicles with Navigation System Push any of the following: PWR/ VOL knob, the CD/AUX XM, or AUDIO button. Vehicles without Navigation System Push any of the following: PWR/ VOL knob or the CD/AUX XM button. Turn the PWR/VOL knob to adjust the volume.
Main Menu Table of Contents Playing the XMTM Satellite Radio SCAN − The scan function samples all channels for 5 seconds. To activate the function, push the SCAN button. Push it again to get out of the sequence. For Vehicles with Navigation System Once your XM channels are preset, pressing the CH DISC button will select your preset channels. Preset − Each preset icon or button can store one channel in XM1 and one in XM2. 1. Push the CD/AUX XM button. (You will see XM1 or XM2.) 2.
Main Menu Table of Contents Playing the XMTM Satellite Radio Satellite Radio Signals Satellite radio receives signals from two satellites to produce clear, highquality digital reception. It offers many channels in several categories. Along with a large selection of different types of music, satellite radio also allows you to view channel and category selections in the audio display. Signal may be blocked by mountains or large obstacles to the south.
Main Menu Table of Contents Playing the XMTM Satellite Radio Depending on where you drive, you may experience reception problems. Interference can be caused by any of these conditions: Receiving Satellite Radio Service If your XM Radio service has expired or you purchased your vehicle from a previous owner, you can listen to a sampling of the broadcasts available on XM Satellite Radio.
Main Menu Table of Contents Playing the XMTM Satellite Radio If you decide to purchase XM Satellite Radio service, contact XM Radio at www.xmradio.com, or at 1-800-852-9696. You will need to give them your radio I.D. number and your credit card number. To get your XM Satellite radio ID number: Turn the TUNE knob until ‘‘0’’ appears in the display. Your I.D. will appear in the display. After you have registered with XM Radio, keep your audio system in the SAT Radio mode while you await activation.
Main Menu Table of Contents Steering Wheel Controls MODE BUTTON The VOL button adjusts the volume up (▲) or down (▼). Press the top or bottom of the button and hold it until the desired volume is reached, then release it. VOL BUTTON CH BUTTON Three controls for the audio system are mounted in the steering wheel hub. These let you control basic functions without removing your hand from the wheel. If you are listening to the radio, use the CH button to change stations.
Main Menu Table of Contents Radio Theft Protection Your vehicle’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific five-digit code using the preset bars or the TUNE knob. Because there are hundreds of number combinations possible from the five-digit, making the system work without knowing the exact code is nearly impossible.
Main Menu Table of Contents Setting the Clock On models without Navigation System DIGITAL CLOCK Press and hold the TUNE/SOUND knob. Change the hours by pressing the until you hear a beep. The displayed time begins to blink. Press on the H (Preset 4) until the numbers advance to the desired time. Change the minutes by pressing the M (Preset 5) until the numbers advance to the desired time. When you are finished, press the TUNE/ SOUND knob again to set the time.
Main Menu Table of Contents Security System The security system helps to protect your vehicle and valuables from theft. The horn sounds and a combination of headlights, parking lights, side marker lights and taillights flashes if someone attempts to break into your vehicle or remove the radio. This alarm continues for two minutes, then the system resets. To reset an alarming system before the two minutes have elapsed, unlock either front door with the key or the remote transmitter.
Main Menu Table of Contents Cruise Control Improper use of the cruise control can lead to a crash. Use the cruise control only when traveling on open highways in good weather. Using the Cruise Control CRUISE CONTROL MASTER BUTTON 3. Press and release the DECEL/ SET button on the steering wheel. The CRUISE CONTROL light on the instrument panel comes on to show the system is now activated.
Main Menu Table of Contents Cruise Control The cruise control may not hold the set speed when you are going up and down hills. If your speed increases going down a hill, use the brakes to slow down. This will cancel the cruise control. To resume the set speed, press the RES/ACCEL button. The CRUISE CONTROL light on the instrument panel will come back on. Changing the Set Speed You can increase the set cruising speed in any of these ways: Press and hold the RES/ACCEL button.
Main Menu Table of Contents Cruise Control Cancelling the Cruise Control You can cancel the cruise control in any of these ways: Tap the brake or clutch pedal. Push the cruise control master button. Pressing the Cruise Control Master Button turns the system off and erases the previous cruising speed. Features Push the CANCEL button on the steering wheel.
Main Menu Table of Contents HomeLink Universal Transceiver The HomeLink Universal Transceiver built into your vehicle can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems. General Information If you are training HomeLink to operate a garage door or gate, you should unplug the motor for that device during training. Repeatedly pressing the remote control button could burn out the motor.
Main Menu Table of Contents HomeLink Universal Transceiver If you are training the second or third buttons, go directly to step 1. 1. Unplug the garage door opener motor from the house current. 2. Hold the end of the garage door opener remote control 2 to 5 inches from HomeLink. Make sure you are not blocking your view of the red indicator in HomeLink.
Main Menu Table of Contents HomeLink Universal Transceiver Canadian Owners: The remote control you are training f rom may stop transmitting af ter 2 seconds. This is not enough f or HomeLink to learn the code. Release and press the button on the remote control every 2 seconds until HomeLink has learned the code. 4. The red indicator in HomeLink should begin flashing. It will flash slowly at first, then rapidly. 5. When the red indicator flashes rapidly, release both buttons.
Main Menu Table of Contents HomeLink Universal Transceiver 1. Make sure you have properly completed the ‘‘Training HomeLink’’ procedure. TRAINING BUTTON 4. Press and hold the button on HomeLink for 3 to 4 seconds. 6. Press the HomeLink button again. It should operate the garage door. 3. Press the training button on the garage door opener unit until the indicator next to the button comes on, then release it. The indicator may blink, or come on and stay on.
Main Menu Table of Contents HomeLink Universal Transceiver Erasing Codes To erase the codes stored in all three buttons, press and hold the two outside buttons until the red light begins to flash, then release the buttons. You should erase all three codes before selling the vehicle. Retraining a Button To train an already programmed HomeLink button with a new device, you do not have to erase all the memory.
Main Menu Before Driving Break-in Period .............................. 152 Fuel Recommendation .................. 152 Service Station Procedures .......... 154 Refueling..................................... 154 Opening and Closing the Hood ........................................ 155 Oil Check .................................... 157 Engine Coolant Check .............. 158 Fuel Economy ................................ 159 Improving Fuel Economy ......... 159 Accessories and Modifications ....
Main Menu Table of Contents Break-in Period, Fuel Recommendation Break-in Period Help assure your vehicle’s future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period: Avoid full-throttle starts and rapid acceleration. Fuel Recommendation Your vehicle is designed to operate on premium unleaded gasoline with a pump octane number of 91 or higher.
Main Menu Table of Contents Fuel Recommendation Some gasoline today is blended with oxygenates such as ethanol or MTBE. Your vehicle is designed to operate on oxygenated gasoline containing up to 10 percent ethanol by volume and up to 15 percent MTBE by volume. Do not use gasoline containing methanol. If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline. For further important fuel-related information, please refer to your Quick Start Guide.
Main Menu Table of Contents Service Station Procedure Refueling Push Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel. Stop the engine and keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately. 1. Park with the driver’s side closest to the gas pump. TETHER ATTACHMENT 2. To open the fuel fill door, push down on the lever located to the left of the driver’s seat. FUEL FILL CAP 154 3.
Main Menu Table of Contents Service Station Procedure 5. Screw the fuel fill cap back on until it clicks at least three times. If you do not properly tighten the cap, the Malfunction Indicator Lamp may come on (see page 248 ). Opening and Closing the Hood HOOD RELEASE HANDLE LATCH 6. Push the fuel fill door closed until it latches. 2. Put your fingers under the front edge of the hood near the center. Slide your hand to the left until you feel the hood latch handle. Push this handle up to release it.
Main Menu Table of Contents Service Station Procedure SUPPORT ROD 3. Pull the support rod out of its clip and insert the end into the hole on the front of the hood near the center. 156 To Close the Hood: Lift it up slightly to remove the support rod from the hole. Put the support rod back into its holding clip. Lower the hood to about a foot (30 cm) above the fender, then let it drop. Make sure it is securely latched.
Main Menu Table of Contents Service Station Procedure 2. Wipe the dipstick with a clean cloth or paper towel. Oil Check 3. Insert it all the way back in its hole. UPPER MARK DIPSTICK (orange handle) Wait a few minutes after turning the engine off before you check the oil. 1. Remove the dipstick (orange handle). 4. Remove the dipstick again, and check the level. It should be between the upper and lower marks. If it is near or below the lower mark, see Adding Oil on page 202 .
Main Menu Table of Contents Service Station Procedure Engine Coolant Check RESERVE TANK MAX MIN Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If it is below the MIN line, see Adding Engine Coolant on page 207 for information on adding the proper coolant. 158 Refer to Owner’s Maintenance Checks on page 192 for information about checking other items on your vehicle.
Main Menu Table of Contents Fuel Economy Improving Fuel Economy Always maintain your vehicle according to the maintenance schedule. See Owner’s Maintenance Checks (see page 192 ). The build-up of snow or mud on your vehicle’s underside adds weight and rolling resistance. Frequent cleaning helps your fuel mileage and reduces the chance of corrosion. Try to maintain a constant speed. Every time you slow down and speed up, your vehicle uses extra fuel. Use the cruise control when appropriate.
Main Menu Table of Contents Accessories and Modifications Modifying your vehicle, or installing some non-Acura accessories, can make your vehicle unsafe. Before you make any modifications or add any accessories, be sure to read the following information. Accessories Your dealer has Acura accessories that allow you to personalize your vehicle. These accessories have been designed and approved for your vehicle, and are covered by warranty.
Main Menu Table of Contents Accessories and Modifications Modifying Your Vehicle Removing parts from your vehicle, or replacing components with aftermarket components could seriously affect your vehicle’s handling, stability, and reliability. Raising your vehicle with an aftermarket suspension kit can affect the handling and stability. Aftermarket wheels, because they are a universal design, can cause excessive stress on suspension components.
Main Menu Table of Contents Carrying Cargo Your vehicle has several convenient storage areas: DOOR POCKET CENTER POCKET SEAT-BACK POCKET Glove box Door and seat-back pockets Trunk, including the back seats when folded down Center pocket Console compartment Roof-rack (if installed) However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe.
Main Menu Table of Contents Carrying Cargo Steps for determining correct load limit: Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. Follow all load limits and other loading guidelines in this manual. 1. Locate the statement, ‘‘the combined weight of occupants and cargo should never exceed 850 lbs’’ on your vehicle’s placard.
Main Menu Table of Contents Carrying Cargo In addition, the total weight of the vehicle, all passengers and accessories must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver’s doorjamb. If you carry large items that prevent you from closing the trunk lid, exhaust gas can enter the passenger area. To avoid the possibility of carbon monoxide poisoning, follow the instructions on page 48 .
Main Menu Driving This section gives you tips on starting the engine under various conditions, and how to operate the manual and automatic transmissions. It also includes important information on parking your vehicle, the braking system, the vehicle stability assist (VSA) system, and facts you need if you are planning to tow a trailer. Towing a Trailer ............................ 183 Driving Preparing to Drive ......................... 166 Starting the Engine........................
Main Menu Table of Contents Preparing to Drive You should do the following checks and adjustments before you drive your vehicle. 1. Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice. 6. Check the seat adjustment (see pages 83 to 84 ). 7. Check the adjustment of the inside and outside mirrors (see pages 87 and 88 ). 8. Check the steering wheel adjustment (see page 70 ). 2. Check that the hood is fully closed. 3. Check that the trunk is fully closed.
Main Menu Table of Contents Starting the Engine 1. Apply the parking brake. 2. In cold weather, turn off all electrical accessories to reduce the drain on the battery. 3. Manual Transmission: Push the clutch pedal down all the way. Automatic Transmission: The immobilizer system protects your vehicle f rom thef t. If an improperlycoded key (or other device) is used, the engine’s f uel system is disabled. See Immobilizer System on page 72 . 6.
Main Menu Table of Contents Manual Transmission Come to a full stop before you shift into Reverse. You can damage the transmission by trying to shift into Reverse with the vehicle moving. Push down the clutch pedal, and pause for a few seconds before shifting into Reverse, or shift into one of the forward gears for a moment. This stops the gears so they won’t ‘‘grind.’’ The manual transmission is synchronized in all forward gears for smooth operation.
Main Menu Table of Contents Manual Transmission Recommended Shift Points Drive in the highest gear that lets the engine run and accelerate smoothly. This will give you the best fuel economy and effective emissions control.
Main Menu Table of Contents Automatic Transmission Shift Lever Position Indicators If the malfunction indicator lamp comes on along with the ‘‘D’’ indicator, there is a problem in the automatic transmission control system. Avoid rapid acceleration, and have the transmission checked by your dealer as soon as possible. To shift from any position, move the shift lever. You cannot shift out of Park when the ignition switch is in LOCK (0) or ACCESSORY (I) position.
Main Menu Table of Contents Automatic Transmission Park (P) − This position mechanically locks the transmission. Use Park whenever you are turning off or starting the engine. To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal. You must also press the release button to shift into Park. To avoid transmission damage, come to a complete stop before shifting into Park. The shift lever must be in Park before you can remove the key from the ignition switch.
Main Menu Table of Contents Automatic Transmission Sequential SportShift Mode − With the shift lever in ‘‘D’’ position, you can select the Sequential SportShift Mode to shift gears; much like a manual transmission, but without a clutch pedal. To enter the Sequential SportShift mode, move the shift lever further to the driver’s side. To return to ‘‘D’’, move the shift lever to the passenger’s side.
Main Menu Table of Contents Automatic Transmission The transmission may automatically downshift from the higher gear to the lower gear under the following conditions: The transmission will also shift automatically as the vehicle comes to a complete stop. It will downshift to first gear when the vehicle speed is under 6 mph (10 km/h). If you try to manually downshift at a speed that would cause the engine to exceed the redline in a lower gear, the transmission will not downshift.
Main Menu Table of Contents Automatic Transmission To shift from Speed range 2→1 under 31 mph (50 km/h) 3→2 under 69 mph (110 km/h) 4→3 under 88 mph (140 km/h) 5→4 under 131 mph (210 km/h) 174 Starting in Second Gear When you are in Sequential SportShift mode, and the vehicle is stopped, push forward on the shift lever to shift to second gear. You will see ‘‘2’’ in the display. Starting out in second gear will help to reduce wheelspin in deep snow or on a slippery surface.
Main Menu Table of Contents Automatic Transmission Shift Lock Release This allows you to move the shift lever out of Park if the normal method of pushing on the brake pedal and pressing the release button does not work. COVER 4. Insert the key in the Shift Lock Release slot. 1. Set the parking brake. 2. Remove the key from the ignition switch. Driving 3. Put a cloth on the edge of the Shift Lock Release slot cover next to the shift lever.
Main Menu Table of Contents Automatic Transmission If you need to use the Shift Lock Release, it means your vehicle is developing a problem. Have the vehicle checked by your dealer. SHIFT LOCK RELEASE SLOT 5. Push down on the key while you move the shift lever out of Park to Neutral. 6. Remove the key from the Shift Lock Release slot, then reinstall the cover. Make sure the notch on the cover is on the left side. Depress the brake pedal and restart the engine.
Main Menu Table of Contents Parking Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly or your vehicle may roll if it is parked on an incline. If your vehicle has a manual transmission, put it in first gear. If the vehicle is facing uphill, turn the front wheels away from the curb. If your vehicle has a manual transmission, put it in first gear. Turn off the lights. Place any packages, valuables, etc., in the trunk or take them with you.
Main Menu Table of Contents Braking System Your vehicle is equipped with disc brakes at all four wheels. A power assist helps reduce the effort needed on the brake pedal. The ABS helps you retain steering control when braking very hard. Put your foot on the brake pedal only when you intend to brake. Resting your foot on the pedal keeps the brakes applied lightly, builds up heat, increases wear and reduces their effectiveness. It also keeps your brake lights on all the time, confusing drivers behind you.
Main Menu Table of Contents Anti-lock Brakes (ABS) Anti-lock Brakes (ABS) The anti-lock brake system (ABS) helps prevent the brakes from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than a person can do it. The ABS also balances the front-torear braking distribution according to vehicle loading. ABS Indicator If the ABS indicator comes on, the anti-lock function of the braking system has shut down.
Main Menu Table of Contents Anti-lock Brakes (ABS) Important Safety Reminders ABS does not reduce the time or distance it takes to stop the vehicle. It only helps with the steering control during braking. ABS INDICATOR Test your brakes as instructed on page 250 . If the brakes feel normal, drive slowly and have your vehicle repaired by your dealer as soon as possible. Avoid sudden hard braking which could cause the rear wheels to lock up and possibly lead to a loss of control.
Main Menu Table of Contents Vehicle Stability Assist (VSA) System The vehicle stability assist (VSA) system helps to stabilize the vehicle during cornering if the vehicle turns more or less than desired. It also assists you in maintaining traction while accelerating on loose or slippery road surfaces. It does this by regulating the engine’s output, and by selectively applying the brakes.
Main Menu Table of Contents Vehicle Stability Assist (VSA) System If the indicator does not come on when the ignition switch is turned to ON (II), there may be a problem with the VSA system. Have your dealer inspect your vehicle as soon as possible. VSA Off Switch VSA OFF SWITCH VSA and Tire Sizes Driving with varying tire or wheel sizes may cause the VSA to malfunction. When replacing tires, make sure they are of the same size and type as your original tires (see page 182 ).
Main Menu Table of Contents Towing a Trailer Your vehicle has been designed to primarily carry passengers and their cargo. You can also use it to tow a trailer if you carefully observe the load limits, use the proper equipment, and follow the guidelines in this section. Check the loading of your vehicle and trailer carefully before starting to drive. Total Trailer Weight: The maximum allowable weight of the trailer and everthing in or on it must not exceed 1,000 lbs (450 kg).
Main Menu Table of Contents Towing a Trailer To achieve a proper tongue load, start by loading 60 percent of the load toward the front of the trailer and 40 percent toward the rear, then re-adjust the load as needed.
Main Menu Table of Contents Towing a Trailer Towing Equipment and Accessories Towing can require a variety of equipment, depending on the size of your trailer, how it will be used, how much load you are towing, and where you tow. Trailer Brakes Acura recommends that any trailer having a total weight of 1,000 lbs (450 kg) or more be equipped with its own electric or surge-type brakes. Safety Chains Always use safety chains when you tow a trailer.
Main Menu Table of Contents Towing a Trailer Trailer Lights Additional Towing Equipment Trailer lights and equipment must comply with federal, state, and local regulations. Check with your local recreational vehicle dealer for the requirements in your area, and use only equipment designed for your vehicle. Many states and Canadian provinces require special outside mirrors when towing a trailer.
Main Menu Table of Contents Towing a Trailer Pre-Tow Checklist When preparing to tow, and before driving away, be sure to check the following: The vehicle has been properly serviced, and the tires, brakes, suspension, cooling system, and lights are in good operating condition. The hitch, safety chains, and any other attachments are secure. Handling Crosswinds and Buffeting Crosswinds and air turbulence caused by passing trucks can disrupt your steering and cause trailer swaying.
Main Menu Table of Contents Towing a Trailer Driving Safely With a Trailer The added weight, length, and height of a trailer will affect your vehicle’s handling and performance, so driving with a trailer requires some special driving skills and techniques. For your safety and the safety of others, take time to practice driving maneuvers before heading for the open road, and follow the guidelines below.
Main Menu Maintenance This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions. This section also includes Maintenance Schedules for normal driving and severe driving conditions, a Maintenance Record, and instructions for simple maintenance tasks you may want to take care of yourself. Seat Belts ........................................ 223 Floor Mats ...................................... 223 Dust and Pollen Filter ..............
Main Menu Table of Contents Maintenance Safety All service items not detailed in this section should be performed by a certified technician or other qualified mechanic. Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required. Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off. To clean parts, use a commercially available degreaser or parts cleaner, not gasoline.
Main Menu Table of Contents Maintenance Schedule The maintenance schedule assumes you will use your vehicle as normal transportation for passengers and their possessions. You should also follow these recommendations: Avoid exceeding your vehicle’s load limit. This puts excess stress on the engine, brakes, and many other vehicle parts. The load limit is shown on the tire information label on the driver’s doorjamb. Drive your vehicle regularly over a distance of several miles (kilometers).
Main Menu Table of Contents Maintenance Schedule Servicing Your Vehicle Your authorized dealer knows your vehicle best and can provide competent, efficient service. However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or skilled person to keep your warranties in effect. Keep all the receipts as proof of completion, and have the person who does the work fill out the Maintenance Record.
Main Menu Table of Contents Follow the Normal Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule on page 195 do not apply. NOTE: If you only OCCASIONALLY drive under ‘‘severe’’ conditions, you should follow the Normal Conditions Maintenance Schedule. ＃: See information on maintenance and emissions warranty, last column, page 192 .
Main Menu Table of Contents Service the items listed at the indicated distance (or time, if given).
Main Menu Table of Contents Follow the Severe Maintenance Schedule if you drive your vehicle MAINLY under one or more of the following conditions: Driving less than 5 miles (8 km) per trip or, in freezing temperatures, driving less than 10 miles (16 km) per trip. Driving in extremely hot [over 90°F (32°C)] conditions. Extensive idling or long periods of stop and go driving, such as a taxi or a commercial delivery vehicle. Trailer towing, driving with a roof rack, or driving in mountainous conditions.
Main Menu Table of Contents Service the items listed at the indicated distance (or time, if given).
Main Menu Table of Contents Maintenance Record (for Normal and Severe Schedules) You or the servicing dealer can record all completed maintenance here, whether you follow the schedule for normal conditions (pages 193 , 194 ) or severe conditions (pages 195 , 196 ). Keep the receipts for all work done on your vehicle.
Main Menu Table of Contents Maintenance Record (for Normal and Severe Schedules) 41,250 mi 66,000 km Signature or dealer stamp mi/km 63,750 mi 102,000 km Date 45,000 mi 72,000 km mi/km mi/km 65,000 mi 104,000 km mi/km 67,500 mi 108,000 km mi/km 70,000 mi 112,000 km mi/km 71,250 mi 114,000 km mi/km 75,000 mi 120,000 km mi/km Date 198 mi/km Date 78,750 mi 126,000 km Date 60,000 mi 96,000 km mi/km Date Date 56,250 mi 90,000 km mi/km Date Date 55,000 mi 88,000 km mi/km Date Date 52,5
Main Menu Table of Contents Maintenance Record (for Normal and Severe Schedules) 82,500 mi 132,000 km Signature or dealer stamp mi/km 101,250 mi 162,000 km Date 85,000 mi 136,000 km mi/km mi/km 105,000 mi 168,000 km mi/km 108,750 mi 174,000 km mi/km 110,000 mi 176,000 km 112,500 mi 180,000 km Date 115,000 mi 184,000 km Date 97,500 mi 156,000 km mi/km mi/km Date mi/km Date 116,250 mi 186,000 km Date 100,000 mi 166,000 km mi/km Maintenance mi/km mi/km Date Date 95,000 mi 152,000 km m
Main Menu Table of Contents Maintenance Record (for Normal and Severe Schedules) 123,750 mi 198,000 km Signature or dealer stamp mi/km 142,500 mi 228,000 km Date 125,000 mi 200,000 km mi/km mi/km 145,000 mi 232,000 km mi/km Date 131,250 mi 210,000 km mi/km Date 135,000 mi 216,000 km mi/km Date 138,750 mi 222,000 km mi/km Date 140,000 mi 224,000 km mi/km Date 200 mi/km Date 146,250 mi 234,000 km mi/km Date Date 130,000 mi 208,000 km mi/km Date Date 127,500 mi 204,000 km Signature or
Main Menu Table of Contents Fluid Locations CLUTCH FLUID (Manual Transmission only) (Light gray cap) ENGINE OIL DIPSTICK (Orange handle) ENGINE OIL FILL CAP WASHER FLUID (Blue cap) AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop) POWER STEERING FLUID (Red cap) COOLANT RESERVOIR Maintenance BRAKE FLUID (Black cap) RADIATOR CAP 201
Main Menu Table of Contents Adding Engine Oil ENGINE OIL FILL CAP Unscrew and remove the engine oil fill cap on top of the valve cover. Pour in the oil slowly and carefully so you do not spill. Clean up any spills immediately. Spilled oil could damage components in the engine compartment. 202 Install the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level. Do not fill above the upper mark; you could damage the engine.
Main Menu Table of Contents Adding Engine Oil Honda Motor Oil is the preferred 5W-30 lubricant for your vehicle. It is highly recommended that you use Honda Motor Oil in your vehicle for optimum engine protection. Make sure the API Certification Seal says ‘‘For Gasoline Engines.’’ The oil viscosity or weight is provided on the container’s label. 5W-30 oil is formulated for yearround protection of your Acura to improve cold weather starting and fuel economy.
Main Menu Table of Contents Changing the Oil and Filter Always change the oil and filter according to the recommendations in the maintenance schedule. The oil and filter collect contaminants that can damage your engine if they are not removed regularly. Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service stationtype hydraulic lift for this service.
Main Menu Table of Contents Changing the Oil and Filter OIL FILTER 8. Refill the engine with the recommended oil. Engine oil change capacity (including filter): 4.4 US qt (4.2 ) 9. Replace the engine oil fill cap. Start the engine. The oil pressure indicator should go out within 5 seconds. If it does not, turn off the engine, and check your work. 10.Let the engine run for several minutes, then check the drain bolt and oil filter for leaks. 12.Install the maintenance cover and tighten the bolt securely.
Main Menu Table of Contents Windshield Washers Check the level in the windshield washer reservoir at least monthly during normal use. LEVEL GAUGE Do not use engine antif reeze or a vinegar/water solution in the windshield washer reservoir. Antif reeze can damage your vehicle’s paint, while a vinegar/water solution can damage the windshield washer pump. Use only commercially-available windshield washer f luid.
Main Menu Table of Contents Engine Coolant Adding Engine Coolant RESERVE TANK Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you. Always let the engine and radiator cool down before removing the radiator cap. Maintenance If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks. Always use Honda All Season Antifreeze/Coolant Type 2.
Main Menu Table of Contents Engine Coolant RADIATOR CAP 4. The coolant level should be up to the base of the filler neck. Add coolant if it is low. Pour the coolant slowly and carefully so you do not spill. Clean up any spill immediately; it could damage components in the engine compartment. 5. Put the radiator cap back on and tighten it. 1. Make sure the engine and radiator are cool. 2. Relieve any pressure in the cooling system by turning the radiator cap counterclockwise, without pressing down. 3.
Main Menu Table of Contents Transmission Fluid 4. Remove the dipstick and check the fluid level. It should be between the upper and lower marks. Automatic Transmission 5. If the level is below the lower mark, remove the fill plug and add fluid into the tube to bring it to the upper mark. DIPSTICK 1. Park the vehicle on level ground. Shut off the engine. 2. Remove the dipstick (yellow loop) from the transmission, and wipe it with a clean cloth. 3. Insert the dipstick all the way into the transmission.
Main Menu Table of Contents Transmission Fluid Always use Honda ATF-Z1 (Automatic Transmission Fluid). If it’s not available, you may use a DEXRON III automatic transmission fluid as a temporary replacement. However, continued use can affect the shift quality. Have the transmission flushed and refilled with Honda ATF-Z1 as soon as it is convenient.
Main Menu Table of Contents Transmission Fluid Manual Transmission BOLT BOLT UNDER COVER Correct level Check the fluid level with the transmission at normal operating temperature and the vehicle sitting on level ground. Remove the transmission filler bolt, and carefully feel inside the bolt hole with your finger. The fluid level should be up to the edge of the bolt hole. If it is not, add Honda Manual Transmission Fluid (MTF) until it starts to run out of the hole.
Main Menu Table of Contents Brake and Clutch Fluid Check the fluid level in the reservoirs monthly. There are up to two reservoirs, depending on the model. They are: Brake fluid reservoir (all models) Clutch fluid reservoir (manual transmission only) Replace the brake fluid according to the recommendations in the maintenance schedule. Always use Honda Heavy Duty Brake Fluid DOT 3. If it is not available, you should use only DOT 3 or DOT 4 fluid, from a sealed container, as a temporary replacement.
Main Menu Table of Contents Brake and Clutch Fluid, Power Steering Fluid Clutch Fluid Power Steering Fluid MAX MIN LOWER LEVEL Maintenance The fluid level should be between the MIN and MAX marks on the side of the reservoir. If it is not, add brake fluid to bring it up to that level. Use the same fluid specified for the brake system. UPPER LEVEL Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; it could damage components in the engine compartment.
Main Menu Table of Contents Power Steering Fluid, Hood Latch Always use Honda Power Steering Fluid. You may use another power steering fluid as an emergency replacement, but have the power steering system flushed and refilled with Honda PSF as soon as possible. Hood Latch PIVOTS A low power steering fluid level can indicate a leak in the system. Check the fluid level frequently, and have the system inspected as soon as possible.
Main Menu Table of Contents Lights Headlight Aiming The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the trunk or pull a trailer, readjustment may be required. Adjustments should be performed by your dealer or other qualified mechanic. NOTE: Halogen headlight bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
Main Menu Table of Contents Lights FASTENER BULB RUBBER WEATHER SEAL 4. Unclip the end of the hold-down wire from its slot. Pivot it out of the way and remove the bulb. 5. Insert the new bulb into the hole, making sure the tabs are in their slots. Pivot the hold-down wire back in place, and clip the end into the slot. AIR INTAKE COVER 1. Open the hood. To change a bulb on the driver’s side, undo the three fasteners and remove the air intake cover. HOLD-DOWN WIRE CONNECTOR 2.
Main Menu Table of Contents Lights 7. Push the electrical connector onto the new bulb. Make sure it is connected securely. Replacing the Front Side Marker/ Turn Signal Light Bulb 3. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 4. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. 8. Turn on the headlights to test the new bulb. 9. On the driver’s side, reinstall the air intake cover.
Main Menu Table of Contents Lights Replacing a Front Parking Light Bulb 1. To change the bulb on the driver’s side, start the engine, turn the steering wheel all the way to the right, and turn off the engine. To change the bulb on the passenger’s side, turn the steering wheel to the left. HOLDING CLIPS 2. Use a flat-tipped screwdriver to remove the two holding clips from the inner fender. 3. Pull the inner fender cover away from the fender and bumper. 4.
Main Menu Table of Contents Lights 6. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. Replacing Rear Bulbs (in Fenders) 7. Turn on the lights to test the new bulb. 8. Put the inner fender cover in place. Install and lock each holding clip by pushing on the center. 1. Open the trunk. 2. Remove the light assembly cover by pulling its outside edge. 3. Remove the socket by turning it one-quarter turn counterclockwise, and pull the bulb straight out of its socket.
Main Menu Table of Contents Lights 5. Remove the socket by turning it one-quarter turn counterclockwise. Replacing Rear Bulbs (in Trunk Lid) BULBS TRIM CLIPS 1. Open the trunk. 2. To replace a bulb on the left side, remove the two trim clips. On the right side, remove a trim clip. 3. Pull the lining back carefully. 220 SOCKETS 4. Determine which of the two bulbs is burned out: taillight or back-up light. 6. Pull the bulb straight out of its socket.
Main Menu Table of Contents Lights 7. Insert the socket back into the light assembly. Turn it clockwise to lock it in place. 9. Reinstall the trunk lid trim. Make sure it is installed under the edge of the trunk lid seal. 8. Turn on the lights to test the new bulb. 10.Press the trim clips back into their holes. Replacing a High-mount Brake Light Bulb 2. Remove the burned-out bulb by pulling it straight out of the socket. 3. Install the new bulb and reinstall the socket.
Main Menu Table of Contents Lights Side Turn Signal Light Each outside mirror has side turn signal lights. The lights should be replaced by your Acura dealer. 222 Rear License Plate Bulb The license plate has two lights above it. The bulbs should be replaced by your Acura dealer.
Main Menu Table of Contents Seat Belts, Floor Mats, Dust and Pollen Filter Seat Belts Floor Mats LOOP If you use aftermarket floor mats make sure they fit properly and that they can be used with the floor mat anchors. Do not put additional floor mats on top of the anchored mats. Dust and Pollen Filter This filter removes the dust and pollen that is brought in from the outside through the heating and cooling system/climate control system.
Main Menu Table of Contents Wiper Blades Check the condition of the wiper blades at least every six months. Look for signs of cracking in the rubber, or areas that are getting hard. Replace the blades if you find these signs, or if they leave streaks and unwiped areas when used. WIPER ARMS LOCK TAB To replace a wiper blade: 1. Raise the wiper arm off the windshield. Raise the driver’s side first, then the passenger’s side.
Main Menu Table of Contents Wiper Blades BLADE BLADE 5. Slide the new wiper blade into the holder until the tabs lock. 6. Slide the wiper blade assembly onto the wiper arm. Make sure it locks in place. REINFORCEMENT 4. Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade. Maintenance 3.
Main Menu Table of Contents Tires To safely operate your vehicle, your tires must be the proper type and size, in good condition with adequate tread, and correctly inflated. The following pages give more detailed information on how to take care of your tires and what to do when they need to be replaced. Using tires that are excessively worn or improperly inflated can cause a crash in which you can be seriously hurt or killed.
Main Menu Table of Contents Tires If you check air pressures when the tires are hot (driven for several miles), you will see readings 4 to 6 psi (30 to 40 kPa, 0.3 to 0.4 kgf/cm ) higher than the cold readings. This is normal. Do not let air out to match the recommended cold air pressure. The tire will be underinflated. Tire Size P215/50R17 93V Cold Tire Pressure for Normal Driving Front: 32 psi (220 kPa , 2.2 kgf/cm ) The compact spare tire pressure is: 60 psi (420 kPa , 4.
Main Menu Table of Contents Tires Tire Inspection Every time you check inflation, you should also examine the tires for damage, foreign objects, and wear. INDICATOR LOCATION MARKS You should look for: Bumps or bulges in the tread or side of the tire. Replace the tire if you find either of these conditions. Cuts, splits, or cracks in the side of the tire. Replace the tire if you can see fabric or cord. Excessive tread wear. TREAD WEAR INDICATORS Your tires have wear indicators molded into the tread.
Main Menu Table of Contents Tires Tire Rotation Front Front (For Non-directional (For Directional Tires and Wheels) Tires and Wheels) Replacing Tires and Wheels Replace your tires with radial tires of the same size, load range, speed rating, and maximum cold tire pressure rating (as shown on the tire’s sidewall). Mixing radial and bias-ply tires on your vehicle can reduce braking ability, traction, and steering accuracy.
Main Menu Table of Contents Tires If you ever replace a wheel, make sure that the wheel’s specifications match those of the original wheels. Replacement wheels are available at your dealer. Installing improper tires on your vehicle can affect handling and stability. This can cause a crash in which you can be seriously hurt or killed. Always use the size and type of tires recommended in this owner’s manual.
Main Menu Table of Contents Tires Tire Chains Mount snow chains on your tires when required by driving conditions or local laws. Install them only on the front tires. Because your vehicle has limited tire clearance, Acura strongly recommends using the chains listed below, made by Security Chain Company (SCC). When installing cables, follow the manufacturer’s instructions, and mount them as tight as you can. Make sure they are not contacting the brake lines or suspension.
Main Menu Table of Contents Checking the Battery TEST INDICATOR WINDOW Check the condition of the battery monthly by looking at the test indicator window. The label on the battery explains the test indicator’s colors. 232 Check the terminals for corrosion (a white or yellowish powder). To remove it, cover the terminals with a solution of baking soda and water. It will bubble up and turn brown. When this stops, wash it off with plain water. Dry off the battery with a cloth or paper towel.
Main Menu Table of Contents Checking the Battery, Vehicle Storage The battery gives off explosive hydrogen gas during normal operation. A spark or flame can cause the battery to explode with enough force to kill or seriously hurt you. Vehicle Storage If you need to park your vehicle for an extended period (more than one month), there are several things you should do to prepare it for storage. Proper preparation helps prevent deterioration and makes it easier to get your vehicle back on the road.
Main Menu Table of Contents Vehicle Storage Leave the parking brake off. Put the transmission in Reverse (6-speed manual) or Park (automatic). Block the rear wheels. If the vehicle is to be stored for a longer period, it should be supported on jackstands so the tires are off the ground. Leave one window open slightly (if the vehicle is being stored indoors). Disconnect the battery. Support the front wiper blade arms with a folded towel or rag so they do not touch the windshield.
Main Menu Taking Care of the Unexpected This section covers the more common problems that motorists experience with their vehicles. It gives you information about how to safely evaluate the problem and what to do to correct it. If the problem has stranded you on the side of the road, you may be able to get going again. If not, you will also find instructions on getting your vehicle towed. 235 Taking Care of the Unexpected Compact Spare Tire....................... 236 Changing a Flat Tire ...............
Main Menu Table of Contents Compact Spare Tire Use the compact spare tire as a temporary replacement only. Get your regular tire repaired or replaced, and put it back on your vehicle as soon as you can. Do not mount snow chains on the compact spare tire. Check the inflation pressure of the compact spare tire every time you check the other tires. It should be inflated to: 60 psi (420 kPa , 4.2 kgf/cm ) Do not use your compact spare tire on another vehicle unless it is the same make and model.
Main Menu Table of Contents Changing a Flat Tire If you have a flat tire while driving, stop in a safe place to change it. Drive slowly along the shoulder until you get to an exit or an area that is far away from the traffic lanes. 2. Turn on the hazard warning lights, and turn the ignition switch to LOCK (0). Have all the passengers get out of the vehicle while you change the tire. TRUNK FLOOR The vehicle can easily roll off the jack, seriously injuring anyone underneath. JACK TOOL TRAY TOOLS 1.
Main Menu Table of Contents Changing a Flat Tire 5. Unscrew the wing bolt and take the spare tire out of the trunk. 6. Loosen each wheel nut 1/2 turn with the wheel wrench. TOOL TRAY 3. Open the trunk. Raise the trunk floor by lifting up on the back edge. 4. Take the tool tray out of the trunk, and remove the tools and the jack. 238 JACKING POINT 7. Place the jack under the jacking point nearest the tire you need to change.
Main Menu Table of Contents Changing a Flat Tire EXTENSION WHEEL NUT WRENCH BRAKE HUB 10.Before mounting the spare tire, wipe any dirt off the mounting surface of the wheel and hub with a clean cloth. Wipe the hub carefully; it may be hot from driving. CONTINUED 239 Taking Care of the Unexpected 8. Use the extension and the wheel nut wrench as shown to raise the vehicle until the flat tire is off the ground. 9. Remove the wheel nuts and flat tire.
Main Menu Table of Contents Changing a Flat Tire 14.Remove the center cap before storing the flat tire in the trunk well. WING BOLT 15.Place the flat tire face down in the spare tire well. For For spare normal tire tire SPACER CONE 11.Put on the spare tire. Put the wheel nuts back on finger-tight, then tighten them in a crisscross pattern with the wheel nut wrench until the wheel is firmly against the hub. Do not try to tighten them fully. 12.Lower the vehicle to the ground and remove the jack.
Main Menu Table of Contents Changing a Flat Tire, If the Engine Won’t Start Loose items can fly around the interior in a crash and could seriously injure the occupants. Store the wheel, jack, and tools securely before driving. 19.Store the wheel cover or center cap in the trunk. Make sure it does not get scratched or damaged. Lower the trunk floor, then close the trunk lid.
Main Menu Table of Contents If the Engine Won’t Start Turn the ignition switch to START (III). If the headlights do not dim, check the condition of the fuses. If the fuses are OK, there is probably something wrong with the electrical circuit for the ignition switch or starter motor. You will need a qualified technician to determine the problem (see Emergency Towing on page 252 ).
Main Menu Table of Contents Jump Starting Although this seems like a simple procedure, you should take several precautions. A battery can explode if you do not follow the correct procedure, seriously injuring anyone nearby. To jump start your vehicle: 1. Open the hood, and check the physical condition of the battery. In very cold weather, check the condition of the electrolyte. If it seems slushy or frozen, do not try jump starting until it thaws.
Main Menu Table of Contents Jump Starting 5. If the booster battery is in another vehicle, have an assistant start that vehicle and run it at a fast idle. 6. Start the vehicle. If the starter motor still operates slowly, check that the jumper cables have good metal-to-metal contact. 4. Connect the second jumper cable to the negative (−) terminal on the booster battery. Connect the other end to the grounding strap as shown. Do not connect this jumper cable to any other part of the engine. 244 7.
Main Menu Table of Contents If the Engine Overheats The pointer of the vehicle’s temperature gauge should stay in the midrange. If it climbs to the red mark, you should determine the reason (hot day, driving up a steep hill, etc.). If your vehicle overheats, you should take immediate action. The only indication may be the temperature gauge climbing to or above the red mark. Or you may see steam or spray coming from under the hood. Do not open the hood if steam is coming out. 1.
Main Menu Table of Contents If the Engine Overheats 6. If you do not find an obvious leak, check the coolant level in the radiator reserve tank. Add coolant if the level is below the MIN mark. 7. If there was no coolant in the reserve tank, you may need to add coolant to the radiator. Let the engine cool down until the pointer reaches the middle of the temperature gauge, or lower, before checking the radiator.
Main Menu Table of Contents Low Oil Pressure Indicator LOW OIL PRESSURE INDICATOR Running the engine with low oil pressure can cause serious mechanical damage almost immediately. Turn of f the engine as soon as you can saf ely get the vehicle stopped. 4. Start the engine and watch the oil pressure indicator. If it does not go out within 10 seconds, turn off the engine. There is a mechanical problem that needs to be repaired before you can continue driving (see Emergency Towing on page 252 ). 1.
Main Menu Table of Contents Charging System Indicator, Malfunction Indicator Lamp Charging System Indicator CHARGING SYSTEM INDICATOR If the charging system indicator comes on brightly when the engine is running, the battery is not being charged. 248 Immediately turn off all electrical accessories. Try not to use other electrically operated controls such as the power windows. Keep the engine running; starting the engine will discharge the battery rapidly.
Main Menu Table of Contents Malfunction Indicator Lamp If you have recently refueled your vehicle, the cause of this indicator coming on could be a loose or missing fuel fill cap. Check the cap or replace it. Tightening the cap will not make the indicator turn off immediately; it takes at least three days of normal driving. Readiness Codes Your vehicle has certain ‘‘readiness codes’’ that are part of the on-board diagnostics for the emissions systems.
Main Menu Table of Contents Brake System Indicator BRAKE SYSTEM INDICATOR＊ ＊ U.S. indicator shown If this indicator comes on while driving, the brake fluid level is probably low in the reservoir. Press lightly on the brake pedal to see if it feels normal. If it does, check the brake fluid level the next time you stop at a service station (see page 212 ). If the fluid level is low, take the vehicle to your dealer and have the brake system inspected for leaks or worn brake pads.
Main Menu Table of Contents Closing the Moonroof If the electric motor will not close the moonroof, do the following: ROUND PLUG SOCKET 1. Check the fuse for the moonroof motor (see page 258 ). If the fuse is blown, replace it with one of the same or lower rating. 2. Try closing the moonroof. If the new fuse blows immediately or the moonroof motor still does not operate, you can close the moonroof manually. 4. Use a screwdriver or coin to remove the round plug in the center of the headliner. 5.
Main Menu Table of Contents Emergency Towing If your vehicle needs to be towed, call a professional towing service or an organization. Never tow your vehicle with just a rope or chain. It is very dangerous. There are two ways to tow your vehicle. Flat-bed Equipment − The operator loads your vehicle on the back of a truck. This is the best way to transport your vehicle. Wheel-lift Equipment − The tow truck uses two pivoting arms that go under the tires (front or rear) and lift them off the ground.
Main Menu Table of Contents Emergency Towing With the front wheels on the ground, it is best to tow the vehicle no farther than 50 miles (80 km), and keep the speed below 35 mph (55 km/h). If your vehicle is equipped with a front spoiler, remove it before towing so it is not damaged. Trying to lif t or tow your vehicle by the bumpers will cause serious damage. The bumpers are not designed to support the vehicle’s weight.
Main Menu Table of Contents Fuses INTERIOR NOTCH The interior fuse box is on the driver’s lower left side. To remove the fuse box lid, pull it toward you and take it out of its hinges. UNDER-HOOD TAB The under-hood fuse box is located near the back of the engine compartment on the driver’s side. To open it, push the tabs as shown. Checking and Replacing Fuses If something electrical in your vehicle stops working, the first thing you should check for is a blown fuse.
Main Menu Table of Contents Fuses BLOWN BLOWN 4. Check the smaller fuses in the under-hood fuse box and all the fuses in the interior fuse box by pulling out each one with the fuse puller provided in the under-hood fuse box. 5. Look for a burned wire inside the fuse. If it is burned, replace it with one of the spare fuses of the same rating or lower. CONTINUED 255 Taking Care of the Unexpected 3. Check each of the large fuses in the under-hood fuse box by looking at the wire inside.
Main Menu Table of Contents Fuses FUSE PULLER If you cannot drive the vehicle without fixing the problem, and you do not have a spare fuse, take a fuse of the same rating or a lower rating from one of the other circuits with the fuse puller provided in the underhood fuse box. Make sure you can do without that circuit temporarily (such as the accessory power socket or radio). 256 If you replace the blown fuse with a spare fuse that has a lower rating, it might blow out again.
Main Menu Table of Contents Fuses UNDER-HOOD FUSE/RELAY BOX No. Amps. 11 12 13 14 15 16 17 18 19 20 21 22 20 A − 20 A 40 A 40 A 15 A 30 A 40 A 40 A 40 A 40 A 100 A 1 2 3 4 5 15 A (30A) 10 A 15 A 10 A Circuits Protected Left Headlight Low (Rear Defroster Coil) Left Headlight Hi Small Light Right Headlight Hi No. Amps. 6 7 8 9 10 15 A 7.
Main Menu Table of Contents Fuses INTERIOR FUSE BOX No. Amps. No. Amps. 1 2 3 4 5 6 (15 A) 15 A (10 A) 10 A 20 A 10 A Circuits Protected DBW Ignition Coil Day Light＊ LAF Audio Amp Interior Light No. Amps. 7 8 9 10 11 12 10 A 20 A 15 A 7.5 A 30 A − Circuits Protected Back-Up Lights Door Lock Front Accessory Sockets OPDS Wiper Not Used 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 20 A 20 A (20 A) 20 A 20 A 15 A 15 A 7.5 A 7.5 A 10 A 7.5 A 20 A 20 A 20 A 20 A 20 A − 7.5 A − 7.
Main Menu Technical Information The diagrams in this section give you the dimensions and capacities of your vehicle, and the locations of the identification numbers. It also includes information you should know about your vehicle’s tires and emissions control systems. State Emissions Testing ............... 271 Technical Information Identification Numbers ................. 260 Specifications ................................. 262 DOT Tire Quality Grading (U. S. Vehicles) ......................
Main Menu Table of Contents Identification Numbers Your vehicle has several identifying numbers in various places. VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is the 17-digit number your Acura dealer uses to register your vehicle for warranty purposes. It is also necessary for licensing and insuring your vehicle. The easiest place to find the VIN is on a plate fastened to the top of the dashboard. You can see it by looking through the windshield on the driver’s side.
Main Menu Table of Contents Identification Numbers The Engine Number is stamped into the engine block. It is on the front. ENGINE NUMBER AUTOMATIC TRANSMISSION NUMBER The transmission number is on a label on top of the transmission.
Main Menu Table of Contents Specifications Dimensions Length Width Height Wheelbase Track Front Rear Weights Gross vehicle weight rating Air Conditioning Refrigerant type Charge quantity Lubricant type Capacities Fuel tank 183.3 in (4,657 mm) 69.4 in (1,762 mm) 57.3 in (1,456 mm) 105.1 in (2,670 mm) 59.6 in (1,515 mm) 59.6 in (1,515 mm) See the certification label attached to the driver’s doorjamb. HFC-134a (R-134a) 25−27 oz (700−750 g) ND-OIL8 Approx. 17.1 US gal (64.
Main Menu Table of Contents Specifications Lights Headlights − − − − − − − − − − − − − − − − High Low Front turn signal Front parking lights Rear turn signal lights Stop/Taillights Taillights High-mount brake light Back-up lights Rear side marker light License plate light Ceiling light Spotlights/Front ceiling lights Trunk light Door courtesy light Vanity mirror lights 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V Battery Capacity 12 V − 38 AH/5 HR Under-hood Engin
Main Menu Table of Contents Specifications Tires Size Pressure 264 Front/Rear Spare Front Rear Spare P215/50R17 93V T135/80D16 101M 32 psi (220 kPa , 2.2 kgf/cm ) 30 psi (210 kPa , 2.1 kgf/cm ) 60 psi (420 kPa , 4.
Main Menu Table of Contents DOT Tire Quality Grading (U.S. Vehicles) The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are also graded for treadwear, traction, and temperature performance according to Department of Transportation (DOT) standards. The following explains these gradings. Traction − AA, A, B, C The traction grades, from highest to lowest, are AA, A, B, and C.
Main Menu Table of Contents DOT Tire Quality Grading (U.S. Vehicles) Temperature − A, B, C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
Main Menu Table of Contents Tire Labeling Tire Labeling The tires that came on your vehicle have a number of markings. Those you should be aware of are described below. 16 − Rim diameter in inches. Tire Size V Whenever tires are replaced, they should be replaced with tires of the same size. Following is an example of tire size with an explanation of what each component means. P225/55R16 94V P − Vehicle type (P indicates passenger vehicle).
Main Menu Table of Contents Emissions Controls The burning of gasoline in your vehicle’s engine produces several byproducts. Some of these are carbon monoxide (CO), oxides of nitrogen (NOx) and hydrocarbons (HC). Gasoline evaporating from the tank also produces hydrocarbons. Controlling the production of NOx, CO, and HC is important to the environment. Under certain conditions of sunlight and climate, NOx and HC react to form photochemical ‘‘smog.
Main Menu Table of Contents Emissions Controls Exhaust Emissions Controls The exhaust emissions controls include four systems: PGM-FI, ignition timing control, exhaust gas recirculation and three way catalytic converter. These four systems work together to control the engine’s combustion and minimize the amount of HC, CO, and NOx that comes out the tailpipe. The exhaust emissions control systems are separate from the crankcase and evaporative emissions control systems.
Main Menu Table of Contents Three Way Catalytic Converter The three way catalytic converter contains precious metals that serve as catalysts, promoting chemical reactions to convert the exhaust gasses without affecting the metals. The catalytic converter is referred to as a three-way catalyst, since it acts on HC, CO, and NOx. A replacement unit must be an original Acura part or its equivalent. The three way catalytic converter must operate at a high temperature for the chemical reactions to take place.
Main Menu Table of Contents State Emissions Testing Testing of Readiness Codes If you take your vehicle for a state emissions test shortly after the battery has been disconnected or gone dead, it may not pass the test. This is because of certain ‘‘readiness codes’’ that must be set in the onboard diagnostics for the emissions systems. These codes are erased when the battery is disconnected, and set again only after several days of driving under a variety of conditions.
Main Menu Table of Contents State Emissions Testing Select a nearby lightly traveled major highway where you can maintain a speed of 50 to 60 mph (80 to 97 km/h) for at least 20 minutes. Drive on the highway in D (A/T) or 6th (M/T). Do not use the cruise control. When traffic allows, drive for 90 seconds without moving the accelerator pedal. (Vehicle speed may vary slightly; this is okay.
Main Menu Warranty and Customer Relations 273 Warranty and Customer Relations Customer Service Information..... 274 Warranty Coverages ..................... 275 Reporting Safety Defects (U.S. Vehicle) ............................. 276 Authorized Manuals ......................
Main Menu Table of Contents Customer Service Information Acura dealership personnel are trained professionals. They should be able to answer all your questions. If you encounter a problem that your dealership does not solve to your satisfaction, please discuss it with the dealership’s management. The service manager or general manager can help. Almost all problems are solved in this way.
Main Menu Table of Contents Warranty Coverages U.S. Owners Your new vehicle is covered by these warranties: Emissions Control Systems Defects Warranty and Emissions Performance Warranty − these two warranties cover your vehicle’s emissions control systems. Time, mileage, and coverage are conditional. Please read your warranty manual for exact information. Original Equipment Battery Limited Warranty − this warranty gives up to 100 percent credit toward a replacement battery.
Main Menu Table of Contents Reporting Safety Defects (U.S. Vehicles) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA), in addition to notifying American Honda Motor Co., Inc. 276 If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Main Menu Table of Contents Authorized Manuals Purchasing Factory Authorized Manuals (U.S. only) The publications shown below can be purchased from Helm Incorporated. You can order in any of three ways: Detach and mail the order form on the right half of this page Call Helm Inc. at 1-800-782-4356 (credit card orders only) Go online at www. helminc. com If you are interested in other years or models, contact Helm Inc. at 1-800-782-4356.
Main Menu Table of Contents Authorized Manuals NOTE: Dealers and Companies please provide dealer or company name, and also the name of the person to whose attention the shipment should be sent. For purchases outside U.S.A. please write to the address shown below for a quotation. Ｓ Ｈ Ｉ Ｐ Ｔ Ｏ Customer Name Attention Street Address − No P.O.
Main Menu Index A Battery Charging System Indicator............................ 54, 248 Jump Starting ............................. 243 Maintenance ............................... 232 Specifications ............................. 263 Before Driving ............................... 151 Belts, Seat ......................................... 10 Brakes Anti-lock System (ABS) ............ 179 Break-in, New Linings .............. 152 Bulb Replacement ..................... 219 Fluid ................................
Main Menu Index Child Seats ........................................ 30 Lower Anchorage Points ............ 39 Tether Anchorage Points ........... 43 Climate Control Sensors ............... 111 Clock, Setting the .......................... 141 Clutch Fluid .................................... 213 Cold Weather, Starting in ............. 167 Compact Spare ............................... 236 Console Compartment .................... 97 Consumer Information.................. 274 Coolant Adding .................
Main Menu Index F G Gas Mileage, Improving................ 159 Gasoline .......................................... 152 Gauge ............................................ 62 Octane Requirement ................. 152 Tank, Filling the......................... 154 Gas Station Procedures................. 154 Gauges Engine Coolant Temperature .... 61 Fuel ................................................ 62 Speedometer ................................ 60 Tachometer ..................................
Main Menu Index Immobilizer System......................... 72 Important Safety Precautions .......... 8 Indicators, Instrument Panel .......... 54 Infant Restraint ................................ 35 Infant Seats ....................................... 35 Tether Anchorage Points ........... 43 Inflation, Proper Tire .................... 226 Inside Mirror .................................... 87 Inspection, Tire .............................. 228 Installing a Child Seat .....................
Main Menu Index O Octane Requirement, Gasoline .... 152 Odometer .......................................... 60 Oil Change, How to ......................... 204 Change, When to ................ 193-196 Checking Engine ....................... 157 Pressure Indicator ............... 54, 247 Selecting Proper Viscosity Chart ....................................... 203 ON (Ignition Key Position) ............ 73 Outside Mirrors ............................... 88 Outside Temperature ......................
Main Menu Index Seat Belts .......................................... 10 Additional Information ................ 20 Automatic Seat Belt Tensioners ................................ 21 Lap/Shoulder Belt ....................... 20 Maintenance ................................. 21 Reminder Light and Beeper ................................. 20, 54 System Components.................... 20 Use During Pregnancy................ 18 Wearing a Lap/Shoulder Belt .... 20 Seats, Adjusting the .........................
Main Menu Index Transmission Checking Fluid Level, Automatic ............................... 209 Checking Fluid Level, Manual .................................... 211 Fluid Selection ........... 210, 211, 212 Identification Number ............... 260 Shifting the Automatic .............. 170 Shifting the Manual ................... 168 Treadwear ...................................... 265 Trip Meter ........................................ 61 Trunk.................................................
Main Menu Index Wheels Adjusting the Steering ................ 70 Alignment and Balance ............. 228 Compact Spare ........................... 236 Wrench ....................................... 237 Windows Operating the Power ................... 89 Rear, Defogger ............................ 69 Windshield Cleaning ........................................ 65 Washers ........................................ 65 Wipers, Windshield Changing Blades ........................ 224 Operation ....................
Main Menu Service Information Summary Gasoline: Premium unleaded gasoline, pump octane number of 91 or higher. Fuel Tank Capacity: 17.1 US gal (64.7 ) Recommended Engine Oil: API Premium grade 5W-30 detergent oil (see page 202 ). Oil change capacity (including filter): 4.4 US qt (4.2 ) Automatic Transmission Fluid: Honda ATF-Z1 (Automatic Transmission Fluid) preferred, or a DEXRON III ATF as a temporary replacement (see page 210 ).
