2009 TL Automobile Owner's Manual

CONTINUED
Install the new bulb in the socket.
Turn it clockwise to lock it in place.
Insert the socket into the light
assembly. Turn it clockwise to
lock it in place.
Testthelightstomakesurethe
new bulb is working.
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Start the engine. If you are
replacing a driver’s side bulb, turn
the steering wheel all the way to
theright.Ifyouarereplacinga
passenger’s side bulb, turn the
steering wheel to the left. Turn off
the engine.
Push the under cover in place and
set the spoiler and inner fender
cover in the original position.
Install the bolts and holding clips,
andlocktheminplacebypushing
on their center.
Use a flat-tipped screwdriver to
remove the three holding clips
from the inner fender.
6.
7.
8.
9.
2.
1.
Lights
Replacing a Front Fog Light Bulb
Maintenance
561
HOLDING CLIPCOVER
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
０８／０７／２９ １９：１１：２５ ３１ＴＫ４６００ ０５６６
2009 TL
Table Of Contents
Main Menu