Owner's Manual (Revised 12/12/2014) User guide

445
uuIf a Tire Goes Flat uChanging a Flat Tire
*
Continued
Handling the Unexpected
4. Remove the cover on the cargo area lining
to access the shaft for the spare tire hoist.
5. Put the wheel nut wrench with the jack
handle bar on the hoist shaft.
Turn the wrench to the left to lower the
spare tire to the ground.
6. Keep turning the wheel nut wrench to
create slack in the cable.
7. Remove the bracket from the spare tire.
Cover
Jack Handle Bar
Wheel Nut Wrench
Bracket
15 ACURA MDX-31TZ56100.book 445 ページ ２０１４年１１月２８日 金曜日 午後５時１７分