Owner's Manual (Revised 12/12/2014) User guide

70
Instrument Panel
Indicators
Indicator Name On/Blinking Explanation Message
Parking Brake
and Brake
System Indicator
(Red)
●
Comes on for a few seconds when
you set the power mode to ON,
then goes off if the parking brake
has been released.
●
Comes on when the parking brake
is applied, and goes off when it is
released.
●
Comes on when the brake fluid
level is low.
●
Comes on if there is a problem with
the brake system.
●
The beeper sounds and the
indicator comes on if you drive with
the parking brake not fully released.
●
Comes on while driving - Make sure the
parking brake is released. Check the brake
fluid level.
2 What to do when the indicator comes
on while driving P. 472
●
Comes on along with the ABS indicator
- Have your vehicle checked by a dealer.
2 If the Brake System Indicator (Red)
Comes On P. 472
Brake System
Indicator
(Amber)
●
Comes on for a few seconds when
you set the power mode to ON,
then goes off.
●
Comes on if there is a problem with
a system related to braking other
than the conventional brake
system.
●
Comes on while driving - Have your
vehicle checked by a dealer.
●
With this indicator on, your vehicle still has
normal braking ability.
U.S.
Canada
(Red)
U.S.
Canada
(Amber)
U.S.
Canada
15 ACURA MDX-31TZ56100.book 70 ページ ２０１４年１１月２８日 金曜日 午後５時１７分