Owner's Manual User guide

462
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
Handling the Unexpected
13. Apply the repair notification label to the
flat surface of the wheel.
u The wheel surface must be clean to
ensure the label adheres properly.
1. Apply the speed restriction label to the
location as shown.
2. Drive the vehicle for about 10 minutes.
u Do not exceed 50 mph (80 km/h).
3. Stop the vehicle in a safe place.
Repair Notification Label
U.S.
Canada
■
Distributing the Sealant in the Tire
Speed Restriction Label
U.S.
Canada
15 ACURA RLX-31TY26100.book 462 ページ ２０１４年５月１９日 月曜日 午後５時４３分