Workshop Manual

COMPILER TECO/ATL
REG. CODE
1-5302-509
MODEL N°
50778
DATE OF ISSUE
10.06.99
REVISION 00
ENDORSED
DATE
10.06.99
47
LUBRICATION CIRCUIT
IX
When the oil filter is replaced, keep it separate from other waste.
Dispose of the old oil correctly since it is highly polluting. Do
not litter.
Oil filter cartridge
Components:
1 Seal 5 Filtering element
2 Plate 6 By-pass valve
3 Rubber pad 7 Spring
4 Spring
Specifications:
Maximum working pressure: 7 bar
Maximum bursting pressure: 20 bar
Filtering degree: 15 m
By-pass valve setting: 1.5 to 1.7 bar
Total filtering area: 730 cm²
Oil pressure check
After remounting, fill up with engine oil, fuel and coolant fluid.
Remove the pressure switch, fit on a union and connect a 10 bar
pressure gauge.
Start the engine and watch the pressure variation in relation to the
oil temperature.
Note : The pressure of the oil must never be less than 1 bar with a
max operating temperature of 80°C at 900 r/min.
117
118