Repair Manual

ELECTRICITY-INSTRUMENTS

AGB indication function:

This function determines whether the car is in reverse « R », forward « D », neutral « N ».

The display is made on the left-hand LCD.

Brightness setting function:

There are two backlighting modes: day mode and night mode.

Day mode:

- The car has its lights off. Only the LCD is lit. In this mode, no setting is possible and light intensity

is set to maximum.

Night mode:

- The car has its lights on. The LCD and tachometer are lit. This mode allows to select 8 levels of

light brightness.

Light intensity setting:

By a short press on the right-hand button. Intensity increases by one step whenever the button is

pressed and, after the eighth time, it loops back to the lowest intensity.

This setting is possible only if the clock setting is not activated.

Protection function:

If battery voltage exceeds 16 Volts, the lighting switches off and is restored when the voltage

drops below 15.7 Volts.

REPAIR MANUAL