Repair Service Manual

REPAIR MANUAL
3
REGULATOR ASSEMBLY
Use the OE13 leading pulley puller, and if necessary use the EO17 led pulley puller (the led pulley
may sometimes be removed manually).
For the leading pulley:
Insert the rod of the X-1720A puller inside the
shaft and screw the X-1720C adapter at the
end of the shaft. (pressurize it by a half-turn)
Although not recommended by CVTech, a
few slight hammer strokes on the puller may
help to separate the leading pulley shaft from
the flywheel.
For the led pulley:
Screw the OE17 adapter inside the shaft.
Screw the puller screws until the pulleys
leave their location.