Repair Service Manual

REPAIR MANUAL
3
REGULATOR ASSEMBLY
REMOVING AND REFITTING THE PULLEYS
Leading pulley
1. Fixed flange
2. Spacing washer
3. Sliding flask
4. Lower main bearing
5. Spacing washer (2mm)
6. Spacing washer (1mm)
7. Spacing washer (0.5mm)
8. Spring
9. Spacing washer (1.21mm)
10. Spacing washer (0.68mm)
11. Upper main bearing
12. Retaining washer
13. Counterweight
14. Centrifugal block
15. Assembled centrifugal block
16. Cap
17. Flat washer
18. Nut
19. Lock washer
20. Fastening screw