Repair Service Manual

REPAIR MANUAL
3
REGULATOR ASSEMBLY
Carefully refit the cam to release the shaft.
Inspection
 Cam deterioration.
 Spring deterioration.
 Visual inspection of the components.
Removing the sliding flask
The cam sliders can be removed using a flat blade
screwdriver.
Inspection
 Changing the cam sliders (3) is required
following the wearing of half the initial
thickness X.
 Wear of the flange (by belt friction)
 Wear of inner bushings of the flange (Parts
non replaceable without damaging the flange)
Cleaning the inner bushings with a degreaser is indispensable to maintain optimum performance.