Repair Service Manual

REPAIR MANUAL
3
REGULATOR ASSEMBLY
Fitting the cam
Fitting the cam (6) is performed in the reverse sequence of removal.
 Position the spring in the cam at
the position noted upon removal.
 Engage the cam (6) onto the shaft
of the fixed flange (1) and onto the
key at the same time
 With the fixed flange (1) locked in
rotation, turn the sliding flange (2)
by one third (1/3) turn counter
clockwise.
 Lower the cam (6) to engage it
onto the cam sliders (3).
 Fit the retaining washer (7).