Repair Service Manual

REPAIR MANUAL
8
ELECTRICITY-INSTRUMENTS
Changing from km to miles or vice-versa:
With the left button pressed, and then turn the ignition on.
The dashboard changes from km to miles or vice-versa.
Fuel level indicator and reserve indicator:
- LCD bar-graph display. 6 bars + fuel pump symbol.
- When 1 bar remains lit, the bar flashes (2 Hz) and the reserve indicator lights up.
- When a circuit is open, all bars are lit, one after the other in a cycle, at a frequency of 2 Hz.
Clock:
- The clock function is still present. The dashboard maintains maintenance counting by time.
- The clock is displayed on the right-hand LCD.
- The clock can be of two types, 12 hours (am-pm) or 24 hours.
If the work unit is km, then the clock works with the 24 hour style.
If the work unit is miles, then the clock works with the 12 hour style (am-pm).
- The two points between the hours and minutes are fixed.
- Clock precision: ±1 second per day.
- The clock maintains time counting for maintenance (1 year).
- After connecting the battery, the clock displays 12 :00, am – pm if the dashboard is in miles.
Setting the clock:
- Setting the clock is possible only when the vehicle is stopped.
- If the clock is being set with the vehicle running, the setting is cancelled.
- To enter the hour setting, hold the right-hand button pressed (>3 seconds): the hours flash.
- Set the hours by short pressing on the right-hand button.
- Hold the right-hand button pressed (>3 seconds) to enter the tens of minutes setting: the tens of
minutes flash.
- Set the tens of minutes by short pressing on the right-hand button.
- Hold the right-hand button pressed (>3 seconds) to enter the minutes setting: the minutes flash.
- Set the minutes by short pressing on the right-hand button.
- Exit the setting mode by long pressing on the right-hand button (>3 seconds).