Repair Service Manual

REPAIR MANUAL
8
ELECTRICITY-INSTRUMENTS
Interior lighting control function (dome light):
This function is available only on models with 2 LCD: 8AJ033, 8AJ033A, 8AG033A, 8AG033B and
8ME033B.
This function controls interior lighting (on 5W lamp)
Switching on and off is progressive.
This function can be controlled differently:
State no.1:
If the dome light is off with the door closed. When the door is opened:
- The dome light lights up progressively over 5 seconds.
- It switches off after 30 seconds.
State no.2:
State no.1 + ignition:
- Progressive extinction of the dome light over 5 seconds, with the door open.
State no.3:
State no.1 + door closed:
- The dome light switches off after 10 seconds.
State no.4:
State no.2 + door open:
- The dome light lights up progressively over 5 seconds.
- It switches off after 30 seconds.
State no.5:
State no.3 + ignition:
- Progressive extinction of the dome light over 5 seconds, with the door closed.
This function can be activated or inhibited using the buttons on the dashboard:
To change the state of this function, ON-OFF or OFF-ON: hold the right-hand button pressed and
then, turn ignition on. The message « P On » or « P OFF » is displayed in the left-hand LCD.
This message means the dome light control function is activated.
This message means the dome light control function is inhibited.
Protection function:
The dome light lamp is protected. If battery voltage exceeds 16 Volts, the function is inhibited, and
is restored when the voltage drops below 15.7 Volts.