Instructions / Assembly

12 | P a g e
4. FIRE HAZARD DATE AND FIGHTING METHOD
Flash Point
n/a
Autoignition
n/a
Flammable Limits in Air
(LEL, %)
(UEL, %)
n/a
n/a
Extinguishing Media
Dry chemical, foam water, or carbon dioxide
Special Fire Fighting Procedure
In the event of a fire, wear NIOSH approved, positive pressure, self-
contained breathing apparatus (SCBA) and full protective clothing.
Evacuate all personnel from anger area. Use dry chemical, foam, water or
carbon dioxide to extinguish fire.
Unusual Fire and Explosion Hazards
PVC will not continue to burn after ignition without an external fire
source. However, when forced to burn, the major gaseous products of
the combustion of PVC are carbon monoxide, carbon, dioxide, and
hydrogen chloride.
5. HUMAN HEALTH DATA
Emergency Overview
During a Fire Emergency
Primary Route(s) of
Exposure
Inhalation
Ingestion
Eye
Skin Contact
Potential Health Effects and Symptoms of Over-Exposure
During a fire emergency, when this product is burned, it may generate smoke.
Eye Contact
Smoke from a fire emergency may cause eye irritation
Skin Contact
Molten plastics from a fire may cause skin burns
Inhalation
Smoke from a fire emergency may cause respiratory irritation
Ingestion
Unlikely
Medical Conditions Aggravated by Over-Exposure
Available toxicological information and the physical/chemical properties of the material suggests that there is no
evidence that this product aggravates an existing medical condition
Carcinogenicity
NPT: No
IARC: No
OSHA: No
6. FIRST AID MEASURES
Eye Contact
Immediately flush eyes with water for at least 15 minutes.
Do not rub the eyes. If irritation develops, consult a
physician.
Skin Contact
If burned by molten plastics, get medical attention
immediately.
Inhalation
If smoke from burning plastics is inhaled, remove subject to
fresh air immediately. If symptoms develop. Seek
immediate medical attention.
Ingestion
Unlikely
Notes to Physician
Treat symptomatically and supportively
Other Instructions
Never give anything by mouth to an unconscious person.