User guide

00590A1 INST0811-06

Wireless Thermometer

and Self-Setting Clock

Instruction Manual

Thank You! We appreciate you for purchasing this wireless thermometer.

We hope you enjoy using this versatile wireless thermometer!

Features:

• Main unit with indoor temperature & humidity and outdoor temperature LCD display.

Clock automatically sets itself, you just select your time-zone.

• Wireless Sensor – range is 100’ (33m).

• Temperature measurement ranges:

Indoor main unit: +32º F to +122º F ( 0ºC to +50ºC )

Outdoor wireless sensor: -4º F to +158º F (-20ºC to +70ºC )

• Battery operated. (batteries not included 4x “AA”)

1 CHECK PACKAGE CONTENTS

(1) Main unit - dimensions: 4.25" x 3.25" x 1.25" *

(1) Wireless Sensor – dimensions: 3.75" x 2.5" x 1" *

(1) Instruction Manual

NOTE: Carefully remove the units from their packaging. Discard the packaging and

save the instructions.

2 READ

Please read these instructions carefully before you set up the thermometer. In this

way you can become familiar with all of the thermometer’s features and get the most

benefit from them.

MODEL # 00590A1

*Dimensions are approximate.

Main Unit

Wireless Sensor

RF W IR EL ES S

(model #0103R)

ALARM

CH. / SET

MEMORY

F/C -

MIN

MAX

MIN

MAX

PAGE 1
00590A1 INST0811-06 Instruction Manual Wireless Thermometer and Self-Setting Clock MODEL # 00590A1 ALARM MIN MAX CH. / SET MEMORY RF WIRELESS + MIN MAX F/C - Main Unit Wireless Sensor (model #0103R) Thank You! We appreciate you for purchasing this wireless thermometer. We hope you enjoy using this versatile wireless thermometer! Features: • Main unit with indoor temperature & humidity and outdoor temperature LCD display. Clock automatically sets itself, you just select your time-zone.
PAGE 2
3 INITIAL SETUP PLACEMENT SUGGESTION NOTE: The main unit is intended for indoor use only. Choose a dry location away from dust, dirt, mold, smoke and avoid temperature extremes. Do not drop the clock. It is a sensitive electronic device and not designed to withstand high impact blows of any kind. Install 2 “AA” batteries into the main unit FIRST. The clock immediately displays the correct time for the eastern (U.S.) time zone.
PAGE 3
Changing the internal Batteries: NOTE: You have less than one minute after the old internal batteries are removed to install fresh batteries. The clock needs constant power so the internal calendar memory (self-setting clock feature) will function properly. To change the backup batteries: 1) Slide the battery compartment cover off and remove the 2 “AA” batteries. 1) Remove the small screw that keeps the Internal battery compartment cover in place. 2) Remove the compartment cover to access the batteries.