User guide

00604 INST0804-06

Wireless Thermometer

with Clock

Instruction Manual

Thank You! We appreciate you for purchasing this wireless thermometer.

We hope you enjoy using this versatile wireless thermometer!

Features:

• Main unit with indoor temperature & outdoor temperature LCD display.

• Wireless Sensor – range is 100’ (33m).

• Temperature measurement ranges:

Indoor main unit: +32º F to +122º F ( 0ºC to +50ºC )

Outdoor wireless sensor: -4º F to +158º F (-20ºC to +70ºC )

• Battery operated. (batteries not included 2x “AA”, 2 x “AAA”)

1 CHECK PACKAGE CONTENTS

(1) Main Unit - 2.75“ x 4” x 1.25“*

(1) Wireless Sensor – dimensions: 3.75" x 2.5" x 1" *

(1) Instruction Manual

NOTE: Carefully remove the units from their packaging. Discard the packaging and

save the instructions.

2 READ

Please read these instructions carefully before you set up the thermometer. In this

way you can become familiar with all of the thermometer’s features and get the most

benefit from them.

MODEL # 00604

*Dimensions are approximate.

Main Unit

Wireless Sensor

(model #01007RS)

LOW

PAGE 1
00604 INST0804-06 Instruction Manual Wireless Thermometer with Clock MODEL # 00604 LOW LOW Main Unit Wireless Sensor (model #01007RS) Thank You! We appreciate you for purchasing this wireless thermometer. We hope you enjoy using this versatile wireless thermometer! Features: • Main unit with indoor temperature & outdoor temperature LCD display. • Wireless Sensor – range is 100’ (33m).
PAGE 2
3 SETUP 4 CHOOSE WHERE TO PLACE THE MAIN UNIT and WIRELESS SENSOR NOTE: The main unit is intended for indoor use only. Choose a dry location away from dust, dirt, mold, smoke and avoid temperature extremes. Do not drop the clock. It is a sensitive electronic device and not designed to withstand high impact blows of any kind. Install 2 “AAA” batteries into the main unit FIRST.
PAGE 3
6 USING the WIRELESS SENSOR Reset Button: Resets the wireless sensor. RESET AA AA WARNING : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.