Instruction manual

5
Set the Time
Press and hold the “SET” button for 3 seconds to enter the SET mode. Once in
SET mode, the preference you are currently setting will blink on the display.
To adjust the currently selected (ashing) item, press the “+” button.
To save your adjustments, press and release the “SET” button again to adjust
the next preference. The preference set order is as follows:
CLOCK (12 or 24 hours)
CLOCK HOUR
CLOCK MINUTE
You will automatically exit SET mode if no buttons are pressed for 30 seconds.
Enter SET mode at any time by pressing and holding the “SET” button for 3
seconds.
Select Degrees Fahrenheit or Celsius
To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units,
press the “ºF/ºC” button located on the display.