Instruction manual

ManualsBrandsAcuRite ManualsDomestic Appliances00638A2

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Questions? Contact Customer Support at

(877) 221-1252 or visit www.AcuRite.com.

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

FCC Information .................... 2

Features & Benets: 3-in-1 ....... 3

Features: Display Unit ............ 4

Setup .................................... 6

3-in-1 Sensor Setup ................ 6

Display Unit Setup ................. 7

Atomic Clock ......................... 8

Set Time, Date & Units ............ 8

Placement Guidelines ............. 9

3-in-1 Sensor Installation ........ 10

Using the Weather Center ..... 11

Troubleshooting ....................12

Care & Maintenance ............. 14

Specications ........................14

Customer Support .................15

Warranty..............................15

Weather Center

model 00623 / 00632 / 00638

Instruction Manual

Summary of content (16 pages)

PAGE 1
Instruction Manual Weather Center model 00623 / 00632 / 00638 CONTENTS Unpacking Instructions............ 2 Package Contents................... 2 Product Registration................ 2 FCC Information..................... 2 Features & Benefits: 3-in-1........ 3 Features: Display Unit............. 4 Setup..................................... 6 3-in-1 Sensor Setup................. 6 Display Unit Setup.................. 7 Atomic Clock.......................... 8 Set Time, Date & Units.............
PAGE 2
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove. Package Contents 1. Display unit with tabletop stand 2. 3-in-1sensor 3. Sensor mounting bracket 4. Mounting hardware 5.
PAGE 3
Features & Benefits 4 1 6 2 5 3 3-in-1 SENSOR 6. Mounting Bracket 1. T emperature & Humidity Sensors 7. A -B-C Switch (not shown) (internal) I D code that must match display’s A-B-C switch to ensure units synchronize. 2. Release Lever for Battery Access 3. Mounting Point 4. Wind Speed Anemometer 5. M ounting Hardware Includes anchors and screws.
PAGE 4
Features & Benefits 1 2 3 4 5 Display Unit 6 7 29 28 27 8 9 10 11 12 13 14 15 26 25 24 23 22 30 31 16 21 32 33 34 4 20 19 18 17
PAGE 5
DISPLAY UNIT 20. + Button For setup preferences. 1. Date 21. SET Button 2. Low Battery Indicator For setup preferences. 3. Atomic Clock Maintains time with split-second 22. Multi-Variable History Chart 4. Atomic Clock Signal Strength Displays heat index, dew point or wind chill, depending on the current outdoor temperature. isplays the past 12 hours of data for D pressure, temperature or wind speed. accuracy and automatically updates for daylight saving time. 23. Seasonal 5.
PAGE 6
SETUP 3-in-1 Sensor Setup 1 Set the A-B-C Switch function improperly. Use lithium batteries in the 3-in-1 sensor for temperatures below -4ºF / -20ºC. The A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize. 1. P ress the release lever and pull off the lower housing of the sensor. 2. R emove the battery compartment cover.
PAGE 7
Display Unit Setup AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. 2 Install or Replace Batteries 1 Set the A-B-C Switch L ocate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter choices for both the display unit and the sensor in order for the units to synchronize. 1. R emove the battery compartment cover. 2.
PAGE 8
Atomic Clock AcuRite atomic clocks use a radio-controlled signal to synchronize to the correct time broadcast by the National Institute of Standards and Technology (NIST) Radio Station WWVB, located near Fort Collins, Colorado. WWVB broadcasts the current time and date with split-second accuracy. The atomic clock and calendar will maintain the correct time and date, and automatically update for daylight saving time to provide the most accurate timekeeping standard possible.
PAGE 9
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust. To ensure accurate temperature measurement, place out of direct sunlight and away from heat sources or vents. Display unit stands upright for tabletop use or is wall-mountable.
PAGE 10
3-in-1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at least 5 feet (1.5 meters) off the ground (higher is better for wind measurement) in an open area. Secure to fence post, 4”x4” wood, 3/4” pole, etc. (not included) LEVEL INSTALLATION Use a bubble level (not included) to ensure level installation for accurate wind measurement. Top or Side Mount Top Mount 1. I nsert the mounting base into the hole on the bottom of the sensor. Side Mount 2.
PAGE 11
OPERATION Using The Weather Center Learning Mode Self-Calibrating Forecasting use a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibrated pressure is tuned in to your location and the unit is ready for superior weather prediction.
PAGE 12
High & Low Records The “MIN/MAX” button displays minimum and maximum recordings for outdoor and indoor temperature and humidity. To view the MINIMUM temperature and humidity readings, press and release the “MIN/MAX” button until the “MIN” icon appears on the display next to the low records. To view the MAXIMUM temperature and humidity readings, press and release the “MIN/MAX” button until the “MAX” icon appears on the display next to the high records.
PAGE 13
Problem Possible Solution Outdoor t emperature is flashing or showing dashes Flashing of the outdoor temperature may be an indication of wireless interference. •M ake sure the A-B-C switch in the battery compartments of both the display unit and sensor are switched to the same letter. You may choose A, B or C; but both units must match to sync up. Inaccurate wind readings •W hat is wind reading being compared to? Pro weather stations are typically mounted at 30 ft high or more.
PAGE 14
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. 3-in-1 Sensor Care Clean the Sensor Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Insect Prevention Insects may cause obstructions and interrupt data by nesting in or on the 3-in-1 sensor.
PAGE 15
Customer Support AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com 24/7 support at www.AcuRite.
PAGE 16
Weather Stations Temperature & Humidity Weather Alert Radio Kitchen Thermometers & Timers Clocks It’s more than accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™. www.AcuRite.com Printed in China 00632 INST 082713 ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147.