Installation Guide

ManualsBrandsAcuRite ManualsGarden CenterTemperature and Humidity Station with 3 Indoor/Outdoor Sensors

Instruction Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Questions? Contact Customer Support at

(877) 221-1252 or visit www.AcuRite.com.

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets ................. 3

Setup .................................... 4

Set the Time, Date & Units ...... 5

Placement Guidelines ............. 6

Using the Display ................... 6

Programmable Alarms ............ 7

Troubleshooting ..................... 8

Care & Maintenance .............. 9

Calibration ............................ 9

Specications ......................... 9

FCC Information .................... 9

Customer Support .................10

Warranty..............................10

Home Environment Display

model 06043

This product requires at least one AcuRite Sensor

(sold separately) to be operational.

Summary of content (16 pages)

PAGE 1
Instruction Manual Home Environment Display model 06043 This product requires at least one AcuRite Sensor (sold separately) to be operational. CONTENTS Unpacking Instructions............ 2 Package Contents................... 2 Product Registration................ 2 Features & Benefits.................. 3 Setup..................................... 4 Set the Time, Date & Units....... 5 Placement Guidelines.............. 6 Using the Display.................... 6 Programmable Alarms.............
PAGE 2
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove. Package Contents 1. Display with Tabletop Stand 2.
PAGE 3
Features & Benefits 11 10 12 9 14 13 15 1 2 16 17 3 18 4 5 6 19 7 8 DISPLAY FRONT 1. Sensor Signal Strength 2. Current Temperature Record Indicators 4. 5. 6. Day of the Week Clock Humidity Level Indicator 9. Press to view today’s high and low records. 12. Reported by indicated sensor. Arrow icon indicates the direction the temperature is trending. 3. 7. 8. 11. RECORDS Button Signal strength detected for the indicated external sensor (sold separately).
PAGE 4
SETUP Display Setup 1 Install Sensor Batteries & Set A-B-C Channel BEFORE powering on the display, install batteries for all wireless sensors (sold separately) that you would like to synchronize with the display. NOTE: If pairing more than one wireless sensor with the display, the A-B-C channel must differ between each sensor. Verify that each sensor has a different channel selected by following the instructions in the corresponding sensor manual.
PAGE 5
Set the Time, Date & Units Press and release the “SET” button, located on the back of the display, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “ “ “ buttons (press and HOLD to fast adjust). “ or To save your adjustments, press and release the “SET” button again to adjust the next preference.
PAGE 6
Placement for Maximum Accuracy AcuRite products are sensitive to surrounding environmental conditions. Proper placement is critical to the accuracy and performance of this product. Display Placement Place the display in a dry area free of dirt and dust. Display stands upright for tabletop use and is wall-mountable. Important Placement Guidelines • To ensure accurate temperature measurement, place product out of direct sunlight and away from any heat sources or vents.
PAGE 7
Programmable Alarms This display features programmable alarms that sound an alert to notify you when a value (for temperature or humidity) has been reached or exceeded. When an alarm is triggered, the display emits an audible beep and flashes data in the affected category. You can customize the alarms by turning ON or OFF the alarms you’d like activated or deactivated, and by inputting your own values to trigger the alarm. Setup an Alarm 1.
PAGE 8
Troubleshooting Problem No reception no bars Display screen not working Possible Solution If the wireless signal indicator shows no bars: • Relocate the display and/or wireless sensor. The products must be within 330 ft (100 m) of each other. • Make sure products (display and Sensors) are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc).
PAGE 9
Care & Maintenance Display Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Calibration The temperature and humidity readings can be calibrated on the display to improve accuracy. Calibration can improve accuracy when product placement or environmental factors impact your data accuracy. 1.
PAGE 10
Customer Support AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 Visit us at www.AcuRite.
PAGE 11
PAGE 12
Weather Stations Temperature & Humidity Weather Alert Radio Kitchen Thermometers & Timers Clocks It’s more than accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™. www.AcuRite.com Printed in China 06043 INST 030316 ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147.
PAGE 13
Customer Support Instruction Manual AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this product available and contact us in any of the following ways: Indoor Temperature & Humidity Sensor (877) 221-1252 Visit us at www.AcuRite.
PAGE 14
SETUP 1 Install or Replace Batteries 2 Set the A-B-C Channel AcuRite recommends high quality alkaline batteries in the sensor for the best product performance. Heavy duty or rechargeable batteries are not recommended. 1. Slide off the battery compartment cover. The A-B-C button is located on the back of the sensor, above the battery compartment. Press and release to set channel to A, B or C (shown on the sensor display’s channel indicator).
PAGE 15
Instruction Manual Tower Sensor Features & Benefits 1 2 Temperature & Humidity Weather Alert Radio Kitchen Thermometers & Timers Flashes when data is being sent to the display unit. 3 3. Battery Compartment 4 4. A-B-C Switch It’s More than Accurate, it’s www.AcuRite.com FCC Information This device complies with part 15 of FCC rules.
PAGE 16
Specifications 1 A-B-C Switch ABC 2 Install Batteries 2 AA batteries -40°F to 158°F; -40°C to 70°C 1% – 99% RH (relative humidity) 2 x AA alkaline or lithium batteries 330’ / 100 m depending on home construction materials Temperature Range: Humidity Range: Battery Requirements: Wireless Range Customer Support AcuRite customer support is committed to providing you with best-in-class service.