Installation Guide

8
If your AcuRite product does not operate properly after trying the
troubleshooting steps, visit www.AcuRite.com or call [phone]
for assistance.
Care & Maintenance
Store in a dry location at room temperature. Clean wireless display with a
soft, damp cloth. Temperature probe should be wiped clean with warm water
immediately after direct contact with foods.
DO NOT place thermometer base or wireless display on or near hot surfaces. DO
NOT heat beyond wireless display’s temperature capacity. DO NOT use the base
or display in the oven. DO NOT wash in dishwasher. DO NOT immerse in water
or use caustic cleaners or abrasives. DO NOT allow any part of the temperature
probe or probe wire to come into direct contact with ames or are-ups. DO NOT
bend or crimp the temperature probe cord. DO NOT lift or move the thermometer
base by the temperature probe wire connection.
Specications
TEMPERATURE RANGE
-57°F to 572°F (-49°C to 300°C)
Probe cord heat resistant up to 700ºF (371ºC)
REMAINING COOK
TIME RANGE
9 hours, 59 minutes
WIRELESS RANGE
200 ft / 60 m depending on home construction
POWER
Thermometer Base: 2 x AAA alkaline batteries
Wireless Display: 3 x AAA alkaline batteries
Troubleshooting
Problem Possible Solution
Check Probe
• Review Warning Messages (see table above).
Display screen
not working
• Check that the batteries are installed
correctly. Batteries may need to be replaced.