Instruction Manual Display for 5-in-1 Weather Sensor model 06022 Package Contents 1. Display with Tabletop Stand 2. Power Adapter 3. Instruction Manual This product requires an AcuRite 5-in-1 Weather Sensor (sold separately) to be operational. IMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE PRODUCT REGISTRATION Register online to receive 1 year warranty protection www.AcuRite.com Questions? Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com.
Features & Benefits Display 1 2 31 4 30 29 28 27 26 5 6 7 8 9 10 11 12 25 24 23 13 14 22 15 16 21 20 18 19 2 18 17
1. 2. 3. 4. Previous 2 Wind Directions Current Wind Speed Current Wind Direction Current Indoor Temperature 19. SET Button For setup preferences. 20. SELECT Button Press to change the WEATHER SELECT category data being displayed. Arrow icon indicates direction temperature is trending. 21. Weather TickerTM 22. Heat Index/ Wind Chill Alert Indicator 5. Display Low Battery Indicator 6. Peak Wind Speed Activates when heat index rises over 90ºF (32ºC) or when wind chill drops below -17ºF (-27ºC).
1 2 3 6 5 4 7 BACK OF DISPLAY 1. Integrated Hang Hole For easy wall mounting. 2. Button For dimmer control while using power adapter. Activates momentary backlight while on battery power. 6. A-B-C Switch ID code that must match 5-in-1 sensor’s A-B-C switch to ensure units synchronize. 3. Plug-in for Power Adapter 4. Removable Tabletop Stand 7. 5. CLEAR ALL/RESET Button Power Adapter 8. Battery Compartment Cover Press and HOLD for 10 seconds for full reset to factory defaults.
SETUP Display Setup AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. 1 Set the A-B-C Switch The A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display in order for the units to synchronize.
Set the Time, Date & Units Press the “ SE T ” button, located on the front of the display, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “T“ or “V“ buttons (press and HOLD to fast adjust). To save your adjustments, press and release the “SET” button again to adjust the next preference.
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display and the sensor are critical to the accuracy and performance of this product. Display Placement Place the display in a dry area free of dirt and dust. To ensure accurate temperature measurement, place out of direct sunlight and away from heat sources or vents. Display stands upright for tabletop use or is wall-mountable.
Weather Select Weather Select displays data including wind chill, dew point, heat index, feels like, days with rain this month, and days since last recorded rainfall. To change the “Weather Select” category shown, press the “SELECT” button on the front of the display. Barometric Pressure Subtle variations in barometric pressure greatly affect the weather. This weather center displays the current pressure with an arrow icon to indicate the direction the pressure is trending (FALLING, STEADY, or RISING).
Weather Ticker ™ The Weather Ticker automatically flashes your real-time weather information and alerts as text in the lower part of the display screen. The possible WEATHER TICKER messages are as follows: HEAT INDEX-XX WINDCHILL-XX DEW POINT-XX IT FEELS LIKE XX OUTSIDE 7 DAY HIGH TEMP. XX- MM/DD 7 DAY LOW TEMP. XX- MM/DD 30 DAY HIGH TEMP. XX- MM/DD 30 DAY LOW TEMP. XX- MM/DD ALL TIME HIGH TEMP. XXX...RECORDED MM/DD/YY ALL TIME LOW TEMP. XXX...RECORDED MM/DD/YY 24 HOUR TEMP.
Troubleshooting Problem Possible Solution Inaccurate temperature or humidity •M ake sure both the display and 5-in-1 sensor are placed away from any heat sources or vents (see page 7). •M ake sure both units are positioned away from moisture sources (see page 7). •M ake sure 5-in-1 sensor is mounted at least 5 ft off of the ground. • Calibrate indoor and outdoor temperature and humidity (see page 11).
Care & Maintenance Display Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Calibration The indoor / outdoor temperature and humidity readings, and barometric pressure can be calibrated on the display to improve accuracy. Calibration can improve accuracy when sensor placement or environmental factors impact the data accuracy. 1.
Specifications DISPLAY’S BUILT-IN TEMPERATURE SENSOR RANGE 32ºF to 122ºF; 0ºC to 50ºC DISPLAY’S BUILT-IN HUMIDITY SENSOR RANGE 1% to 99% RH WIND SPEED 0 to 99 mph; 0 to 159 km/h WIND DIRECTION INDICATORS 16 points RAINFALL 0.01 inches (0.
Customer Support AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 Visit us at www.AcuRite.
Weather Stations Temperature & Humidity Weather Alert Radio Kitchen Thermometers & Timers Clocks It’s More than Accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™. www.AcuRite.com Printed in China 06022M INST 061716 ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147.
