Instruction Manual Weather Center model 01604 / 01645 CONTENTS Unpacking Instructions.................2 Package Contents........................2 Product Registration.....................2 Features & Benefits: 3-in-1...........3 Features & Benefits: Display ........4 Setup.........................................6 3-in-1 Sensor Setup.....................6 Display Setup..............................7 Set the Time, Date & Units............8 Placement Guidelines..................
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove. Package Contents 1. Display 2. 3-in-1 Sensor 3. Sensor Mounting Bracket 4. Mounting Hardware 5. Power Adapter 6.
Features & Benefits 4 1 6 2 5 3 3-in-1 SENSOR 5. M ounting Hardware Includes anchors and screws. Qty Diameter Length 4 #4 1” 1 #6 or #8 1/4” or 3/8” 1. T emperature & Humidity Sensors (internal) 2. Release Lever for Battery Access 3. Mounting Point 6. M ounting Bracket 4. Wind Speed Anemometer 7. A -B-C Switch (not shown) I D code that must match display’s A-B-C switch to ensure units synchronize.
Features & Benefits 1 2 3 24 23 25 4 5 6 22 27 7 21 8 20 9 19 26 28 29 30 10 11 12 13 14 18 31 17 16 32 33 15 34 4
FRONT OF DISPLAY 16. AUTO DIM Mode Indicator (page 8) 17. Display Low Battery Indicator 1. Sensor Low Battery Indicator 18. Date 2. Current Outdoor Temperature 19. Current Indoor Humidity Arrow icon indicates the direction the temperature is trending. Arrow icon indicates the direction the humidity is trending. 3. Seasonal Information Wind chill will show when temperatures are below 40oF (4oC), Dew Point when temperature is 41-79oF (5-26oC), and Heat Index when temperature is over 80oF (27oC). 20.
SETUP 3-IN-1 Sensor Setup 1 Set the A-B-C Switch 1. P ress the release lever and pull off the lower housing of the sensor. The A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display in order for the units to synchronize. 2. R emove the battery compartment cover. Take note of the A-B-C switch setting inside the battery compartment. 2 Install or Replace Batteries 3.
Display Setup 1 Set the A-B-C Switch 2. I nsert 3 x AAA alkaline batteries into the battery compartment, as shown. Follow the polarity (+/–) diagram in the battery compartment. L ocate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter choices for both the display and the sensor in order for the units to synchronize. 3. Replace the battery cover.
Set the Time, Date & Units Press the “ ” button, located on the back of the display, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “ “ “ buttons (press and HOLD to fast adjust). “ or To save your adjustments, press and release the “ ” button again to adjust the next preference.
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display and the sensor are critical to the accuracy and performance of this product. Display Placement Place the display in a dry area free of dirt and dust. To ensure accurate temperature measurement, place out of direct sunlight and away from heat sources or vents. Display stands upright for tabletop use.
3-in-1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at a minimum height of 5 feet (1.5 meters) off the ground, in an open area. Higher is better for wind measurements - the National Weather Service recommends 33 feet high! MOUNTING OPTIONS The included mounting bracket it designed to screw directly onto wooden posts or surfaces that are 2x4 or larger.
OPERATION Using The Weather Center Learning Mode Self-Calibrating Forecasting use a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibrated pressure is tuned in to your location and the unit is ready for superior weather prediction.
High & Low Records Today’s high and low records are displayed for indoor and outdoor temperature, humidity and wind speed. Today’s records automatically clear at 12:00am midnight every day. To manually clear all of today’s LOW recorded values, press and hold the “ ” button for 2 seconds. Dashes display to confirm you have cleared the LOW records. To manually clear all of today’s HIGH recorded values, press and hold the “ ” button for 2 seconds. Dashes display to confirm you have cleared the HIGH records.
Troubleshooting Problem No outdoor sensor reception no bars Possible Solution • Relocate the display and/or the 3-in-1 sensor. The units must be within 330 ft (100 m) of each other. • Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc). • Use standard alkaline batteries (or lithium batteries in sensor when temperature is below -4ºF/-20ºC).
Troubleshooting Problem Possible Solution Inaccurate temperature or humidity • Make sure both the display and 3-in-1 sensor are placed away from any heat sources or vents (see page 9). • Make sure both units are positioned away from moisture sources (see page 9). • Make sure 3-in-1 sensor is mounted at least 5 ft off of the ground. • Calibrate indoor and outdoor temperature and humidity (see page 15).
Care & Maintenance Display Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. 3-in-1 Sensor Care Clean the Sensor Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Insect Prevention Insects may cause obstructions and interrupt data by nesting in or on the 3-in-1 sensor. To limit this problem, spray sensor housing with a household insect repellent.
*To change from AUTO to MANUAL pressure mode and vice versa, press AND HOLD the “ ” button for at least 10 seconds. The display indicates the current pressure mode selected,“AUTO” or “MANUAL”. After 20 seconds of inactivity, the display will save the adjustments and exit calibration mode. Note: Calibrations will be erased if the display is reset or if batteries are removed and the power adapter is unplugged.
Specifications TEMPERATURE RANGE Outdoor: -40ºF to 158ºF; -40ºC to 70ºC Indoor: 32ºF to 122ºF; 0ºC to 50ºC HUMIDITY RANGE Outdoor: 1% to 99% Indoor: 1% to 99% WIND SPEED 0 to 99 mph; 0 to 159 kph WIRELESS RANGE 330 ft / 100 m depending on home construction materials OPERATING FREQUENCY 433 mhz POWER Display: 5 V, 100mA power adapter 3 x AAA alkaline batteries 1 x CR2032 coin cell battery Sensor: 4 x AA alkaline or lithium batteries DATA REPORTING Wind Speed: 18 second updates Outdoor temperatur
Customer Support AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 Visit us at www.AcuRite.
Weather Stations Temperature & Humidity Weather Alert Radio Kitchen Thermometers & Timers Clocks It’s more than accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™. www.AcuRite.com Printed in China 01604 INST 071217 ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147.