Instructions / Assembly

ManualsBrandsAcuRite ManualsGarden CenterTemperature and Humidity Weather Station with 3 Sensors

Instruction Manual

Temperature & Humidity Sensor

model 06002 / 592TXR

Printed in China

06002M INST 082516

It’s More than Accurate, it’s

AcuRite offers an extensive assortment of precision instruments,

designed to provide you with information you can depend on to

Plan your day with conﬁdence

™

www.AcuRite.com

Weather

Stations

Temperature

& Humidity

Weather

Alert Radio

Kitchen

Thermometers

& Timers

Clocks

Features & Benets

SENSOR

1. Integrated Hanger

For easy placement.

2. Wireless Signal Indicator

Flashes when data is being

wirelessly transmitted.

3. Battery Compartment

4. A-B-C Switch

5. Battery Compartment Cover

SETUP

Set the A-B-C Switch

The A-B-C switch is located inside

the battery compartment. It can be

set to A, B or C.

NOTE:

If being used with a

companion product that has an

A-B-C channel, you must select the

same letter choice for both the

sensor and the product it is being

paired with in order for the units to

synchronize.

Install or Replace Batteries

AcuRite recommends high quality

alkaline or lithium batteries in

the sensor for the best product

performance. Heavy duty or

rechargeable batteries are not

recommended.

Sensor Setup

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1- This device may NOT cause harmful interference, and

2- This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip

ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment.

Such modications could void the user authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation of the device.

Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights

are the property of their respective owners. AcuRite uses patented technology.

Visit www.AcuRite.com/patents for details.

The sensor requires lithium

batteries in low temperature

conditions. Cold temperatures

can cause alkaline batteries

to function improperly. Use

lithium batteries in the sensor for

temperatures below -4ºF / -20ºC.

1. Slide off the battery

compartment cover.

2. Insert 2 x AA batteries into

the battery compartment, as

shown. Follow the polarity

(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

Summary of content (22 pages)

PAGE 1
Instruction Manual Temperature & Humidity Sensor model 06002 / 592TXR Features & Benefits 1 SENSOR 2 Weather Stations Temperature & Humidity Weather Alert Radio Kitchen Thermometers & Timers 5 Clocks It’s More than Accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™. www.AcuRite.com 1. Integrated Hanger For easy placement. 2.
PAGE 2
Specifications 1 A-B-C Switch ABC TEMPERATURE RANGE HUMIDITY RANGE BATTERY REQUIREMENTS WIRELESS RANGE OPERATING FREQUENCY 2 -40°F to 158°F; -40°C to 70°C 1% – 99% RH (relative humidity) 2 x AA alkaline or lithium batteries 330ft / 100 m depending on home construction materials 433MHz Customer Support Install Batteries 2 AA batteries AcuRite customer support is committed to providing you with best-in-class service.
PAGE 3
Instruction Manual Home Environment Display models 06024/06036 auto This product requires at least one AcuRite Monitor or Sensor (sold separately) to be operational. CONTENTS Unpacking Instructions............ 2 Package Contents................... 2 Features & Benefits.................. 2 Setup..................................... 6 Display Setup......................... 6 Set the Time, Date & Units....... 7 Backlight Settings................... 11 Placement Guidelines.............
PAGE 4
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove. Package Contents 1. Display 2. Power Adapter 3. Instruction Manual 1 Features & Benefits 2 2 auto 2 2 3 4 5 4 6 FRONT OF DISPLAY 1. Backlight Button 4.
PAGE 5
BACK OF DISPLAY 1 1 6 2 5 3 4 7 1. Integrated Hang Holes 5. CLEAR Button For easy wall mounting. For resetting the high and low records that are stored for the location(s) that the display is tracking. 2. Battery Compartment 3. Plug-in for Power Adapter 6. Fold-out Stand 4. RESET Button For tabletop use. Press and release for full reset to factory defaults. 7.
PAGE 6
DISPLAY SCREEN 1 2 3 4 5 6 7 8 15 9 auto 10 11 14 4 13 12
PAGE 7
1. Icon 13. Disappears after weather forecast self-calibration is complete (see page 12). 14. Date 2. 12 to 24 Hour Weather Forecast 15. +SENSOR Icon Self-Calibrating Forecasting pulls data from your backyard to generate your personal forecast. Indicates a Wired Sensor (sold separately) is reporting data to the display. Shown with temperature, humidity and water detector icons when displaying wired sensor data (#8, #9 and #10). 3.
PAGE 8
SETUP Display Setup 1 Install External Monitor or Sensor Batteries BEFORE powering on the display, install batteries for all external Monitors and/or Sensors (sold separately) that you would like to synchronize with the display. A-B-C Channel A-B-C Channel NOTE: If pairing more than one wireless sensor (model 06002 or 06044) with the display, the A-B-C channel must differ between each sensor.
PAGE 9
Set the Time, Date & Units Press and release the “SET” button, located on the front of the display, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “▲“ or “▼“ buttons (press and HOLD to fast adjust). To save your adjustments, press and release the “SET” button again to adjust the next preference.
PAGE 10
Compatible Monitors Perfect for: (continued) • Indoor and outdoor applications Temperature & Humidity Sensor Model 06002 Temperature & Humidity Sensor • Indoor applications NOTE: During setup, an image of model 06002 will be shown.
PAGE 11
Setup a Location Name on the Display For easy home environment monitoring, label data readings on the display using the following directions. Simply select the name from a preset list that most closely matches the location where the display, Monitor or Sensor that is reporting data for the location is installed: 1. Press and release the color-coded button next to the location you want to update on the display. 2. Press and release the “ ” button. 3.
PAGE 12
Sync a New Monitor or Sensor with the Display To manually add a new Monitor or Sensor to the display: 1. Press and release the color-coded button next to a location on the display with the name “AVAILABLE.” Next, “ADD MONITOR” will flash at the top of the display. ” will 2. Press the “SET” button. “SELECT MONITOR STYLE” and “ ” or ” flash on the display. 3. Press and release the “▲“ or “▼“ buttons to highlight the icon that represents the type of product you are adding. 4.
PAGE 13
Backlight Settings The color display features three different lighting settings: High (100%) brightness, Medium (60%) brightness and Low (30%) brightness. Using battery power alone, the backlight is available momentarily for 10 seconds by pressing the Backlight button. When display is powered by the power adapter, backlight remains on at 100% brightness. Press the Backlight button once to dim to 60% brightness; press again to dim to 30%, press a 3rd time to enter “AUTO DIM” mode. “ appears on the display.
PAGE 14
OPERATION Using the Home Environment Display Weather Forecast AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from a sensor in your backyard. It generates a forecast with pinpoint accuracy personalized for your exact location. Note: To forecast precipitation accurately a weather-resistant Monitor or Sensor (sold separately) must be placed outdoors and its location name must be set to OUTDOOR or GARDEN.
PAGE 15
the highest and lowest values recorded since the unit was powered on. A timestamp is shown in the clock area of the display indicating when the record values were recorded. To manually clear the records currently being viewed, press and release the CLEAR button, located in the battery compartment of the display. Dashes display to confirm you have cleared the record currently being viewed.
PAGE 16
Disable an Alarm 1. Press and release the color-coded button next to the location on the display for which you wish to disable an alarm. 2. Press and release the “ ” button to enter alarm SET MODE. ” button until the reading for which you wish to 3. Press and release the “ disable an alarm is highlighted on the display. “ALARM ON” will flash. 4. Press and release the “▲“ or “▼“ buttons until “ALARM OFF” appears. 5. Press and release the “ ” button to cycle to the next reading for the location. 6.
PAGE 17
Problem Possible Solution Inaccurate forecast • Weather Forecast icon predicts conditions for the next 12 to 24 hours, not current conditions. • Verify at least one weather-resistant Monitor/Sensor is placed outdoors with the location name set to OUTDOOR or GARDEN. This is required for full weather forecast functionality. ” icon has disappeared • Verify the Learning Mode “ from the display. Learning Mode must complete before forecast and pressure will be accurate.
PAGE 18
Care & Maintenance Display Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Calibration Calibrate Temperature and Humidity The temperature and humidity readings can be calibrated on the display to improve accuracy. Calibration can improve accuracy when product placement or environmental factors impact your data accuracy. 1.
PAGE 19
Specifications DISPLAY’S BUILT-IN TEMPERATURE SENSOR RANGE 32ºF to 122ºF; 0ºC to 50ºC DISPLAY’S BUILT-IN HUMIDITY SENSOR RANGE 1% to 99% RH WIRELESS RANGE 330 ft / 100 m depending on home construction materials OPERATING FREQUENCY 433 MHz POWER Display: 5vdc power adapter 3 x AAA alkaline batteries (for backup; optional) FCC Information This device complies with part 15 of FCC rules.
PAGE 20
Customer Support AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 Visit us at www.AcuRite.
PAGE 21
19
PAGE 22
Weather Stations Temperature & Humidity Weather Alert Radio Kitchen Thermometers & Timers Clocks It’s more than accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™. www.AcuRite.com Printed in China 06036M INST 071416 ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147.